1.1 本规范涵盖了建筑和相关应用中使用的由两块或两块以上玻璃与夹层材料粘合而成的平板夹层玻璃的质量要求。 1.2 根据玻璃的数量、厚度和处理，以及夹层的数量和厚度，玻璃应层压以用于包括但不限于安全、安保、滞留、飓风/循环风阻力、防爆、防弹、降噪和装饰玻璃。 1.3 光学畸变及其评估目前不在本标准范围内。建议使用实体模型作为评估玻璃的方法。（参见 附录X1 .) 1.4 除厚度名称外，以英寸-磅单位表示的尺寸值应视为标准值。括号中的值仅供参考。 1.5 以下安全隐患警告仅适用于试验方法部分第节 7. ，本规范: 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 This specification covers the quality requirements of flat laminated glass consisting of two or more lites of glass bonded with an interlayer material for use in building and related applications. 1.2 Depending on the number, thickness, and treatment of lites, and the number and thickness of interlayers, the glass shall be laminated for applications including, but not limited to, safety, security, detention, hurricane/cyclic-wind resistance, blast resistance, bullet resistance, sound reduction, and decorative glazing. 1.3 Optical distortion and the evaluation thereof are not currently within the scope of the standard. Mockups are recommended as a method to evaluate glass. (See Appendix X1 .) 1.4 The dimensional values, except thickness designations, stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. 1.5 The following safety hazards caveat pertains only to the test method portion, Section 7 , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.