MIL MIL-DTL-83729D-斩波器机电通用规范-国家数字标准馆

现行 MIL MIL-DTL-83729D

到馆提醒

收藏跟踪

购买正版

Choppers, Electromechanical General Specification for 斩波器机电通用规范

发布日期： 2018-03-28

MIL-DTL-83729D涵盖了机电斩波器（见6.5）的一般要求，以下简称斩波器，旨在将直流信号转换为与交流驱动正弦波或方波频率相同且具有明确相位关系的修正方波。

MIL-DTL-83729D covers the general requirements for electromechanical choppers (see 6.5), hereinafter referred to as choppers, designed to convert direct current signals to modified square waves of the same frequency as, and bearing a definite phase relationship to, a driving sine or square wave of alternating current.

分类信息

发布单位或类别：美国-美国军事规范和标准

关联关系

研制信息

相似标准/计划/法规

MIL MIL-DTL-83729B Notice 1-Validation

CHOPPERS, ELECTROMECHANICAL GENERAL SPECIFICATION FOR (SUPERSEDING MIL-C-83729A)
机电斩波器通用规范（代替MIL-C-83729A）

机电式自动调平系统通用规范
General specification for electromechanical automatic leveling servo system

Specification for general requirements for mechanical and electromechanical aircraft indicators
机械和机电式飞机指示器的一般要求规范

ECA/EIA 5200000

GENERIC SPECIFICATION FOR SPECIAL-USE ELECTROMECHANICAL SWITCHES OF CERTIFIED QUALITY
经质量认证的专用机电开关总规范

BS EN 62047-4-2010

Semiconductor devices. Micro-electromechanical devices-Generic specification for MEMS
半导体器件微机电设备

GB/T 32817-2016

半导体器件微机电器件 MEMS总规范
Semiconductor devices—Micro-electromechanical devices—Generic specification for MEMS

Electromechanical Power Controller/Relay, General Specification For (Stabilized: Jan 2016)
机电功率控制器/继电器通用规范（稳定:2016年1月）

BS EN 61811-1-2015

Electromechanical telecom elementary relays of assessed quality-Generic specification and blank detail specification
经质量评定的机电式电信基本继电器

IEC 62047-4-2008

Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS
半导体器件 - 微机电器件第4部分:Mems的通用规范

IEC 61020-1-2019

Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
机电开关用于电气和电子设备 - 第1部分:通用规范

UNE-EN 61020-1-2011

Electromechanical switches for use in electrical and electronic equipment -- Part 1: Generic specification
电工电子设备用机电开关第1部分:总规范

电气和电子设备用机电开关第1部分：总规范
Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification

KS C IEC 61811-1

품질 평가된 전자-기계식 통신 기본 계전기 — 제1부: 일반 사양 및 공란 세부 사양
评估质量的机电电信基本继电器 - 第1部分:通用规范和空白详细规范

IEC 61811-1-2015

Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification
评估质量的机电电信基本继电器 - 第1部分:通用规范和空白详细规范

GB/T 16608.1-2023

有质量评定的电信用基础机电继电器第1部分：总规范与空白详细规范
Electromechanical telecom elementary relays of assessed quality—Part 1: Generic specification and blank detail specification

BS 06/30147118 DC

IEC 61020-1. Electromechanical switches for use in electrical and electronic equipment. Part 1. Generic specification
IEC 61020-1 用于电气和电子设备的机电开关第一部分总规范

UNE-EN 61811-1-2000

Electromechanical non-specified time all-or-nothing relays of assessed quality -- Part 1: Generic specification
经质量评定的机电非规定时间有或无继电器第1部分:总规范

BS 07/30148822 DC

BS IEC 62047-4. Semiconductor devices. Micro-electromechanical devices. Part 4. Generic specifications for MEMS
BS IEC 62047-4 半导体器件微型机电设备第四部分微机电系统通用技术条件

BS EN 116000-3-1996

Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays-Test and measurement procedures
电子元件质量评定协调体系总规范:机电式全有或无继电器测试和测量程序

BS QC 160000-1-1987

Harmonized system of quality assessment for electronic components. Electrical relays. Generic specification: electromechanical all-or-nothing relays-Test and measurement procedures
电子元件质量评定协调体系电气继电器总规范:机电式全有或无继电器测试和测量程序

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统