ГОСТ Р ИСО 10332-99-用于压力目的的无缝焊接（除了埋弧焊）钢管超声波检测用于验证液压密封性-国家数字标准馆

现行 ГОСТ Р ИСО 10332-99

到馆阅读

收藏跟踪

购买正版

Трубы стальные напорные бесшовные и сварные (кроме труб, изготовленных дуговой сваркой под флюсом). Ультразвуковой метод контроля сплошности 用于压力目的的无缝焊接（除了埋弧焊）钢管超声波检测用于验证液压密封性

实施日期： 2001-01-01

此标准规定了无缝和焊接钢管压力管的超声波控制方法的连续性，不包括埋弧焊制造管道的要求。
   本标准适用于所述管外直径不小于168.3毫米和外径与厚度的管的不小于5。通过消费者与这个标准的制造商之间的协议，可用于小口径管道

Настоящий стандарт устанавливает требования к ультразвуковому методу контроля сплошности бесшовных и сварных стальных напорных труб, исключая трубы, изготовленные дуговой сваркой под флюсом.
 Настоящий стандарт распространяется на трубы наружным диаметром не менее 168,3 мм и с отношением наружного диаметра к толщине трубы не менее 5. По взаимному согласованию между потребителем и изготовителем настоящий стандарт может применяться для труб меньшего диаметра

分类信息

发布单位或类别：俄罗斯-俄罗斯国家标准

CCS分类： J64机械 - 通用加工机械与设备 - 焊接与切割设备

ICS分类： 19.100试验 - 无损检测

关联关系

研制信息

相似标准/计划/法规

GB/T 32552-2016

无缝和焊接钢管（埋弧焊除外）的自动全圆周超声厚度检测
Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes

无缝和焊接（埋弧焊除外）钢管缺欠的自动涡流检测
Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for detection of imperfections

GOST R ISO 10124-1999

Трубы стальные напорные бесшовные и сварные (кроме труб, изготовленных дуговой сваркой под флюсом). Ультразвуковой метод контроля расслоений
用于压力目的的无缝焊接（除了埋弧焊）钢管用于检测层状缺陷的超声波检测

GB/T 40080-2021

钢管无损检测用于确认无缝和焊接钢管（埋弧焊除外）水压密实性的自动电磁检测方法
Nondestructive testing of steel tubes—Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness

BS EN ISO 10893-2-2011+A1-2020

Non-destructive testing of steel tubes-Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
钢管的无损检测

BS EN ISO 10893-12-2011+A1-2020

Non-destructive testing of steel tubes-Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
钢管的无损检测

BS EN ISO 10893-1-2011+A1-2020

Non-destructive testing of steel tubes-Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
钢管的无损检测

无缝和焊接（埋弧焊除外）钢管纵向和/或横向缺欠的全圆周自动超声检测
Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections

BS ISO 10332-2010

Non-destructive testing of steel tubes. Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
钢管的无损检测用于验证液压密封性的无缝和焊接（埋弧焊除外）钢管的自动超声波检测

Non-destructive testing of steel tubes — Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
钢管无损检测——用于验证液压密封性的无缝和焊接（埋弧焊除外）钢管的自动超声波检测

GB/T 18256-2015

钢管无损检测用于确认无缝和焊接钢管（埋弧焊除外）水压密实性的自动超声检测方法
Non-destructive testing of steel tubes—Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness

Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
钢管无损检测.第1部分:无缝和焊接（埋弧焊除外）铁磁钢管液压密封性验证的自动电磁检测；德文版EN 10246-1:1996

UNE-EN 10246-14-2000

NON-DESTRUCTIVE TESTING OF STEEL TUBES. PART 14: AUTOMATIC ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS.
钢管的无损检测第14部分:层流缺陷检测用无缝和焊接（埋弧焊除外）钢管的自动超声波检测

KS B ISO 10893-1

강관의 비파괴검사 — 제1부: 수압 기밀을 검증하기 위한 이음매 없는 강관 및 용접(서브머지드 아크 용접 제외) 강관의 자동화 전자기 검사
钢管非破坏性试验 - 第1部分:无缝和焊接（水下弧焊除外）钢管的自动电磁测试用于验证液压密封性

KS B ISO 10893-12

강관의 비파괴검사 — 제12부: 이음매 없는 강관과 용접 (서브머지드 아크 용접 제외) 강관의전 원주면 자동화 초음파 두께 검사
钢管无损检测的测试 - 第12部分:无缝和焊接（埋弧焊除外）钢管的自动全周超声波测厚

KS B ISO 10893-2

강관의 비파괴검사 — 제2부: 불완전부를 검출하기 위한 이음매 없는 강관과 용접(서브머지드 아크 용접 제외) 강관의 자동화 와전류탐상검사
钢管无损检测的测试 - 第2部分:用于检测缺陷的无缝和焊接（埋弧焊除外）钢管的自动测试

KS B ISO 10893-1

강관의 비파괴검사 — 제1부: 수압 기밀을 검증하기 위한 이음매 없는 강관과 용접 (서브머지드 아크 용접 제외) 강관의 자동 전자기 검사
钢管无损检测第1部分:验证液压密封性的无缝和焊接（埋弧焊除外）钢管的自动电磁检测

KS B ISO 10893-12

강관의 비파괴검사 — 제12부: 이음매 없는 강관과 용접(서브머지드 아크 용접 제외) 강관의 전 원주면 자동 초음파 두께 검사
钢管无损检测第12部分:无缝钢管和焊接钢管（埋弧焊除外）全周超声波厚度自动检测

KS B ISO 10893-2

강관의 비파괴검사 — 제2부: 불완전부를 검출하기 위한 이음매 없는 강관과 용접(서브머지드 아크 용접 제외) 강관의 자동 와전류탐상검사
钢管无损检测第2部分:缺陷检测用无缝和焊接（埋弧焊除外）钢管的自动涡流检测

ISO 10893-1-2011

Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
钢管无损检测Spart 1:用于验证液压密封性的无缝和焊接（埋弧焊除外）钢管的自动电磁检测

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统