1.1本规范涵盖标称尺寸为8英寸的钢骨增强波纹聚乙烯（PE）管道系统的材料、尺寸、工艺、伸长率、抗冲击性、管道刚度、穿孔和标记的要求和测试方法。（200毫米），至80英寸。（2000毫米）。受本标准管辖的钢骨增强聚乙烯管拟用于地下应用，其中土壤为其柔性壁提供支撑。这些管道将用于收集或输送雨水径流，用于雨水管和排水管或两者。 1.2以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.3没有类似或等效的ISO标准。 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 This specification covers requirements and test methods for materials, dimensions, workmanship, elongation, impact resistance, pipe stiffness, perforations, and markings for steel reinforced corrugated polyethylene (PE) piping systems of nominal sizes 8 in. (200 mm), through 80 in. (2000 mm). The steel reinforced polyethylene pipes governed by this standard are intended for use in underground applications where soil provides support for their flexible walls. These pipes will be used to collect or convey stormwater runoff for storm sewers and drainage pipes, or both. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 There is no similar or equivalent ISO standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.