AS/NZS 4325.1:1995-铜或铝导体电力电缆用压缩和机械连接器第1部分:试验方法和要求-国家数字标准馆

现行 AS/NZS 4325.1:1995

到馆阅读

收藏跟踪

购买正版

Compression and mechanical connectors for power cables with copper or aluminium conductors, Part 1: Test methods and requirements 铜或铝导体电力电缆用压缩和机械连接器第1部分:试验方法和要求

发布日期： 1995-10-05

提供适用于10 mm（sup）2（/sup）及以上铜导线和16 mm（sup）2（/sup）及以上铝导线的两大类连接器的测试方法和要求。A类连接器适用于短路持续时间和强度相对较高的电路。B类连接器适用于过载或短路受到保护装置限制的情况。本标准在技术上等同于并复制自IEC 1238-1:1993。

Provides test methods and requirements for two broad classes of connectors suitable for copper conductors of 10 mm(sup)2(/sup) and greater, and aluminium conductors of 16 mm(sup)2(/sup) and greater. Class A connectors are intended for circuits which can be subjected to short circuits of relatively high duration and intensity. Class B connectors are intended for situations in which overloads or short circuits are restricted by protective devices. This Standard is technically equivalent to and reproduced from IEC 1238-1:1993.

分类信息

发布单位或类别：澳大利亚-澳大利亚/新西兰标准

关联关系

研制信息

相似标准/计划/法规

BS 7609-1992+A2-2009

Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors
铜或铝导体电力电缆用非绝缘压缩和机械连接器的安装和检查实施规程

UNE 211005-2003 IN

Compression and mechanical connectors for power cables with copper or alluminium conductors. Compression terminal lugs for power cables to fit equipment up to and including 1 kV. Overall dimensions.
铜或铝导体电力电缆用压缩和机械连接器用于安装1kV及以下设备的电力电缆压缩终端接线片外形尺寸

Specification for performance of mechanical and compression joints in electric cable and wire connectors-Compression joints in nickel, iron and plated copper conductors
电缆和电线连接器中机械接头和压缩接头的性能规范镍、铁和镀铜导线中的压缩接头

KS C IEC 61238-1-1

전력 케이블용 압축 및 기계적 커넥터 — 제1-1부: 비절연 도체에서 시험한 정격 전압 1 kV(Um = 1.2 kV) 이하 전력 케이블용 압축 및 기계적 커넥터의 시험방법 및 요구사항
电力电缆用压缩和机械连接器.第1-1部分:在非绝缘导体上试验的额定电压1kV（Um=1.2kV）以下电力电缆用挤压和机械连接器的试验方法和要求

BS EN IEC 61238-1-1-2019

Compression and mechanical connectors for power cables-Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on non-insulated conductors
电力电缆的压缩和机械连接器在非绝缘导体上测试额定电压不超过1kV（U_m=1.2kV）的电力电缆用压缩连接器和机械连接器的试验方法和要求

IEC 61238-1-1-2018

Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on non-insulated conductors
电力电缆用压缩和机械连接器.第1-1部分:在非绝缘导体上试验的额定电压1kV（U_m=1.2kV）以下电力电缆用压缩和机械连接器的试验方法和要求

额定电压35kV（Um=40.5kV）及以下电力电缆导体用压接式和机械式连接金具试验方法和要求
Compression and mechanical connectors for power cables for rated voltages up to 35kV(Um=40.5kV) - Test methods and requirements

KS C IEC 61238-1-3

전력 케이블용 압축 및 기계적 커넥터 — 제1-3부: 비절연 도체에서 시험한 정격 전압 1 kV(Um = 1.2 kV) 초과 30 kV(Um = 36 kV) 이하 전력 케이블용 압축 및 기계적 커넥터의 시험방법 및 요구사항
电力电缆用压缩和机械连接器.第1-3部分:在非绝缘导体上试验的额定电压1kV（Um=1.2kV）以上至30kV（Um=36kV）电力电缆用挤压和机械连接器的试验方法和要求

GB/T 14315-2008

电力电缆导体用压接型铜、铝接线端子和连接管
Compression type terminal lugs and ferrules with copper or aluminum for power cables conductors

BS EN IEC 61238-1-3-2019+A11-2019

Compression and mechanical connectors for power cables-Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (U_m = 1,2 kV) up to 36 kV (U_m = 42 kV) tested on non-insulated conductors
电力电缆用压缩和机械连接器

KS C IEC 61238-1-2

전력 케이블용 압축 및 기계적 커넥터 — 제1-2부: 절연 도체에서 시험한 정격 전압 1 kV(Um = 1.2 kV) 이하 전력 케이블용 절연 관통 커넥터의 시험방법 및 요구사항
电力电缆用压缩和机械连接器.第1-2部分:在绝缘导体上试验的额定电压1kV（Um=1.2kV）以下电力电缆用绝缘穿孔连接器的试验方法和要求

KS C IEC 61238-1(2016 Confirm)

정격 전압 30 kV(Um＝36 kV) 이하 전력 케이블용 압축 및 기계적 커넥터－제1부：시험 방법 및 요구 사항
额定电压30kV（Um＝36kV）以下电力电缆用压缩连接器和机械连接器第1部分:试验方法和要求

KS C IEC 61238-1

정격 전압 30 kV(Um = 36 kV) 이하 전력 케이블용 압축 및 기계적 커넥터 —제1부: 시험방법 및 요구사항
额定电压30kV（Um=36kV）以下电力电缆用压缩和机械连接器第1部分:试验方法和要求

IEC 61238-1-3-2018

Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (U_m = 1,2 kV) up to 30 kV (U_m = 36 kV) tested on non-insulated conductors
电力电缆用压缩和机械连接器.第1-3部分:在非绝缘导体上试验的额定电压大于1kV（U_m=1,2kV）至30kV（U_m=36kV）的电力电缆用压缩和机械连接器的试验方法和要求

BS EN IEC 61238-1-2-2019

Compression and mechanical connectors for power cables-Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on insulated conductors
电力电缆的压缩和机械连接器在绝缘导线上测试额定电压不超过1kV（U_m=1.2kV）的电力电缆用绝缘穿孔连接器的试验方法和要求

IEC 61238-1-2-2018

Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on insulated conductors
电力电缆用压缩连接器和机械连接器.第1-2部分:在绝缘导体上试验的额定电压1kV（U_m=1.2kV）以下电力电缆用绝缘穿孔连接器的试验方法和要求

DIN EN IEC 61238-1-3

Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (U<(Index)m> = 1.2 kV) up to 36 kV (U<(Index)m> = 42 kV) tested on non-insulated conductors (IEC 61238-1-3:2018)
电力电缆用压缩和机械连接器.第1-3部分:在非绝缘导体上试验的额定电压大于1kV（U<（指数）m>=1.2kV）至36kV（U<（指数）m>=42kV）的电力电缆用压缩和机械连接器的试验方法和要求（IEC 61238-1-3-2018）

DIN EN IEC 61238-1-1

Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (U<(Index)m> = 1.2 kV) tested on non-insulated conductors (IEC 61238-1-1:2018); German version EN IEC 61238-1-1:20
电力电缆用压缩和机械连接器.第1-1部分:在非绝缘导体上试验的额定电压1kV（U<（指数）m>=1.2kV）以下电力电缆用压缩和机械连接器的试验方法和要求（IEC 61238-1-1-2018）；德国版本EN IEC 61238-1-1:20

UNE-EN 61238-1-2006

Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) -- Part 1: Test methods and requirements. (IEC 61238-1:2003, modified)
额定电压36kV（Um=42kV）以下电力电缆用压缩连接器和机械连接器第1部分:试验方法和要求（IEC 61238-1-2003 修改）

Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm²
6 mm以下铜导线电缆用预绝缘压缩端子和连接器的安装和检查实施规程

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统