首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 Casing While Drilling(CD)-Stand-alone Chapter of the IADC Drilling Manual;12th Edition
到馆提醒
收藏跟踪
购买正版
随钻套管有望成为一项重要的钻井技术。这本新电子书是IADC钻井手册第12版的早期版本,是对这项重要技术的杰出介绍。涵盖CwD技术和操作的范围。主题包括可回收和不可回收CwD,以及尾管钻井和可回收尾管钻井。作者:Moji Karimi和Eric Moellendick。包括16幅全彩插图。
Casing while Drilling promises to be a major enabling technology for drilling. This new eBook, an early-release chapter of the 12th edition of the IADC Drilling Manual, is an outstanding introduction to this important technology. Covers the range of CwD technology and operations.Topics include both retrievable and non-retrievable CwD, as well as liner drilling and retrievable liner drilling. Authors: Moji Karimi and Eric Moellendick. Includes 16 full-color illustrations.
分类信息
发布单位或类别: 美国-国际钻井承包商协会
关联关系
研制信息
相似标准/计划/法规
现行
CSA W178.2-18
Certification of Welding Inspectors
焊接检验员的认证
2018-05-01
现行
DB50/T 757-2018
消防泵自动巡检控制设备网络监管系统
2018-04-19
现行
DB50/T 868-2018
安全生产技术规范 第2部分:通用要求
2018-07-16
未生效
DB1404/T 3-2023
康复护理师职业基本要求
2023-06-20
已修订
ISO/IEC 14882-2015
Information technology -- Programming languages -- C++
信息技术 - 编程语言 - C
2015-01-14
现行
IEC 60050-713-1998/AMD3-2018
Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 713: Radiocommunications: transmitters, receivers, networks and operation
修改件3.国际电工词汇(IEV).第713部分:无线电通信:发射机、接收机、网络和操作
2018-10-17
制定中
prEN ISO 19905-1
Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 1: Jack-ups (ISO/DIS 19905-1:2022)
石油和天然气工业移动式海上装置的现场特定评估第1部分:自升式平台
制定中
prEN 12201-4
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems
供水管道系统 压力下排水和污水管道系统 - 聚乙烯(Pe) - 第4部分:供水系统阀门
制定中
prEN ISO 19160-2
Addressing - Part 2: Assigning and maintaining addresses for objects in the physical world (ISO/DIS 19160-2:2022)
寻址第2部分:为物理世界中的对象分配和维护地址
现行
FprEN ISO 3262-18
Extenders - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO/FDIS 3262-18:2023)
填充剂规范和试验方法第18部分:沉淀硅酸钠铝
制定中
prEN ISO 14172
Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO/DIS 14172:2022)
焊接耗材镍和镍合金手工金属电弧焊用涂敷焊条分类
现行
FprEN ISO 22477-2
Geotechnical investigation and testing - Testing of geotechnical structures - Part 2: Testing of piles: static tension load testing (ISO/FDIS 22477-2:2023)
岩土工程勘察和试验岩土工程结构试验第2部分:桩的试验:静态拉伸载荷试验
制定中
prEN ISO 16119-5
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 5: Aerial spray systems (ISO/DIS 16119-5:2021)
农林机械喷雾器的环境要求第5部分:空中喷雾系统
现行
FprEN ISO 22721
Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO/FDIS 22721:2023)
输送带.地下采矿用织物结构的橡胶或塑料覆盖的输送带规范(ISO/FDIS 22721:2023)
现行
prEN ISO 10468
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO/DIS 10468:2022)
玻璃纤维增强热固性塑料管在潮湿或干燥条件下环蠕变性能的测定
制定中
prEN ISO 407
Small medical gas cylinders - Pin-index yoke-type valve connections (ISO/FDIS 407:2023)
小型医用气瓶销式分度轭阀连接
现行
FprEN ISO 7933
Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/FDIS 7933:2023)
热环境的人类工效学.使用预测热应变的计算对热应力进行分析测定和解释
制定中
prEN ISO 11855-8
Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 8: Electrical heating systems (ISO/DIS 11855-8:2022)
建筑环境设计嵌入式辐射加热和冷却系统的设计、尺寸、安装和控制第8部分:电加热系统
制定中
prEN ISO 14919
Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO/DIS 14919:2023)
热喷涂火焰和电弧喷涂用电线、杆和帘线分类供货技术条件
制定中
prCEN/TS 17471
Cranes - Interface between loader crane and work platform
起重机.装载机起重机和工作平台之间的接口