1.1这些试验方法描述了确定安装在混凝土、混凝土砌体和钢制结构构件中的动力驱动紧固件的静态轴向拉伸和剪切强度的程序。 1.2这些试验方法适用于垂直于结构构件平面安装的紧固件。 1.3不包括拉伸和剪切、疲劳、动态和扭转负载阻力的组合试验。 1.4以公制（SI）单位表示的值应视为标准值。 括号中的英寸-磅单位仅供参考。 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 第6节给出了具体的危险说明。 ====意义和用途====== 这些测试方法旨在测量电源的锚固能力和抗剪性- 驱动紧固件提供信息，从中导出适用的设计值，用于结构应用，如混凝土、混凝土砌体和钢构件。

1.1 These test methods describe procedures for determining the static axial tensile and shear strengths of power-actuated fasteners installed in structural members made of concrete, concrete masonry, and steel. 1.2 These test methods are intended for use with fasteners that are installed perpendicular to a plane surface of the structural member. 1.3 Tests for combined tension and shear, fatigue, dynamic, and torsional load resistance are not covered. 1.4 The values stated in metric (SI) units are to be regarded as standard. The inch-pound units in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 6. ====== Significance And Use ====== These test methods are intended to measure the anchoring capability and shear resistance of power-actuated fasteners to provide information from which applicable design values are to be derived for use in structural applications, such as in members of concrete, concrete masonry, and steel.