首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
被代替 GB/T 2423.23-1995
到馆阅读
收藏跟踪
购买正版
电工电子产品环境试验 试验Q:密封 Environmental testing for electric and electronic products Test Q:Sealing
发布日期: 1995-01-27
实施日期: 1995-08-01
废止日期: 2014-03-07
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
GB/T 2424.2-2005
电工电子产品环境试验 湿热试验导则
Environmental Testing for electric and electronic products -- Guidance for damp heat tests
2005-09-19
现行
GB/T 2424.7-2006
电工电子产品环境试验 试验A和B(带负载)用温度试验箱的测量
Environmental tests for electric and electronic products - Measurements in temperature chambers for tests A and tests B (with load)
2006-12-19
现行
GB/T 2423.28-2005
电工电子产品环境试验 第2部分:试验方法 试验T:锡焊
Basic environmental testing procedures for electric and electronic products-Part2:Test methods-Test T:Soldering
2005-08-26
现行
GB/T 2424.25-2000
电工电子产品环境试验 第3部分:试验导则 地震试验方法
Environmental testing for electric and electronic products--Part 3:Test guidance--Seismic test methods
2000-10-17
现行
GB/T 2423.37-2006
电工电子产品环境试验 第2部分:试验方法 试验L:沙尘试验
Environmental testing for electric and electronic products - Part 2: Test methods - Test L:Dust and sand
2006-12-19
现行
GB/T 2423.101-2008
电工电子产品环境试验 第2部分:试验方法 试验:倾斜和摇摆
Environmental testing for electric and electronic products - Part 2: Test methods - Test: inclinations and swings
2008-05-20
现行
GB/T 2423.58-2008
电工电子产品环境试验 第2-80部分: 试验方法 试验Fi: 振动 混合模式
Environmental testing for electric and electronic products - Part 2:Tests -Test Fi: Vibration - Mixed Mode
2008-05-19
现行
GB/T 16838-2021
消防电子产品环境试验方法及严酷等级
Environmental test and severities for fire electronic products
2021-08-20
现行
GB/T 2423.15-2008
电工电子产品环境试验 第2部分: 试验方法 试验Ga和导则: 稳态加速度
Environmental testing for electric and electronic products - Part 2: Test methods - Test Ga and guidance: Acceleration, steady
2008-03-24
现行
GB/T 5170.1-2016
电工电子产品环境试验设备检验方法 第1部分:总则
Inspection methods for environmental testing equipments for electric and electronic products—Part 1:General
2016-12-13
现行
GB/T 13951-2016
移动式平台及海上设施用电工电子产品环境试验一般要求
General rule of environmental tests of electric and electronic products for mobile platforms and offshore installations
2016-12-13
现行
GB/T 2423.32-2008
电工电子产品环境试验 第2部分:试验方法 试验Ta: 润湿称量法可焊性
Environmental testing for electric and electronic products - Part 2: Test methods - Test Ta: Solderability test by the wetting balance method
2008-03-24
现行
GB/T 2423.57-2008
电工电子产品环境试验 第2-81部分: 试验方法 试验Ei: 冲击 冲击响应谱合成
Environmental testing for electric and electronic products - Part 2: Tests - Test Ei: Shock - Shock response spectrum synthesis
2008-05-19
现行
GB/T 2423.52-2003
电工电子产品环境试验 第2部分:试验方法 试验77:结构强度与撞击
Environmental testing for electric and electronic products--Part 2:Test methods--Test 77:Body strength and impact shock
2003-11-24
现行
GB/T 5170.5-2016
电工电子产品环境试验设备检验方法 第5部分:湿热试验设备
Inspection methods for environmental testing equipments for electric and electronic products—Part 5:Damp heat testing equipments
2016-12-13
现行
GB/T 37143-2018
电工电子产品成熟度试验方法
Maturity testing for electric and electronic products
2018-12-28
现行
GB/T 2423.43-2008
电工电子产品环境试验 第2部分:试验方法 振动、冲击和类似动力学试验样品的安装
Environmental testing for electric and electronic products—Part 2:Test methods—Mounting of specimens for vibration, impact and similar dynamic tests
2008-05-19
现行
GB/T 2423.4-2008
电工电子产品环境试验 第2部分:试验方法 试验Db: 交变湿热(12h+12h循环)
Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat,cyclic ( 12h+12h cycle)
2008-05-19
现行
GB/T 2423.53-2005
电工电子产品环境试验 第2部分:试验方法 试验Xb:由手的磨擦造成标记和印刷文字的磨损
Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands
2005-01-18
现行
GB/T 20626.2-2018
特殊环境条件 高原电工电子产品 第2部分:选型和检验规范
Specific environmental condition—Electrical and electronic products for plateau—Part 2: Selective types and testing specification
2018-12-28