BS EN 15383:2012+A1:2013-排水和排污用塑料管道系统基于聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）人孔和检查室-国家数字标准馆

现行 BS EN 15383:2012+A1:2013

到馆阅读

收藏跟踪

购买正版

Plastics piping systems for drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Manholes and inspection chambers 排水和排污用塑料管道系统基于聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）人孔和检查室

发布日期： 2013-10-31

交叉引用:EN 124EN 476EN 681-1EN 1119EN 1917EN 13101EN 14364:2006+A1:2008EN 14396CEN/TS 14632EN ISO 604:2003ISO 604:2002EN ISO 3126ISO 3126ISO 2602ISO 8533包含以下内容:修订，2013年10月。修订并替换BS EN 15383:2012

Cross References:EN 124EN 476EN 681-1EN 1119EN 1917EN 13101EN 14364:2006+A1:2008EN 14396CEN/TS 14632EN ISO 604:2003ISO 604:2002EN ISO 3126ISO 3126ISO 2602ISO 8533Incorporates the following:Amendment, October 2013. Amends and replaces BS EN 15383:2012

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

배수 및 하수용 플라스틱 배관 시스템 —불포화 폴리에스테르 수지 유리섬유 강화 플라스틱(GRP) — 압력 및 비압력 배관
用于压力和非压力排水和污水的塑料管道系统 - 基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统

UNE-EN 14364-2007+A1-2009

Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
带或不带压力的排水和污水用塑料管道系统.基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）.管道、配件和接头规范

BS 05/30141329 DC

EN 15383. Plastics piping systems for drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Manholes and inspection chambers
EN 15383 排水和排污用塑料管道系统基于聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）人孔和检查室

BS 10/30237537 DC

EN 15383. Plastics piping systems for drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Manholes and inspection chambers
EN 15383 排水和排污用塑料管道系统基于聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）人孔和检查室

BS EN ISO 23856-2021

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
压力和非压力供水、排水或排污用塑料管道系统基于不饱和聚酯（UP）树脂的玻璃纤维增强热固性塑料（GRP）系统

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
压力和非压力供水、排水或排水用塑料管道系统.基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统

DIN SPEC 19674-2

Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 2: Pipes
供水、排水和污水加压用玻璃纤维增强聚乙烯（PE-GF）塑料管道系统第2部分:管道

BS PD CEN/TS 14578-2013

Plastics piping systems for water supply or drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Recommended practice for installation
供水、排水和排污用塑料管道系统基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）安装推荐规程

UNE-CEN/TS 14578-2005 EX

Plastics piping systems for water supply or drainage and sewerage. Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP). Recommended practice for installation.
供水、排水和排污用塑料管道系统基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GPR）安装的推荐做法

Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers (includes Amendment A1:2013)
排水和污水用塑料管道系统.基于聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）.人孔和检查室；德文版EN 15383:2012+A1:2013

DIN SPEC 19674-1

Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 1: General
供水、排水和污水加压用玻璃纤维增强聚乙烯（PE-GF）塑料管道系统第1部分:总则

BS ISO 16611-2017

Plastics piping systems for drainage and sewerage without pressure. Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP). Dimensions, requirements and tests
无压排水和排污用塑料管道系统非圆形管道和接头由基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）制成尺寸、要求和试验

Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
无压力排水和污水的塑料管道系统 - 基于不饱和聚酯树脂（UP）的玻璃增强热固性塑料（GRP）制成的非圆形管道和接头 - 尺寸要求和试验

Plastics piping systems for drainage and sewerage without pressure - Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) - Dimensions, requirements and tests (ISO 16611:2017)
无压排水和污水用塑料管道系统.基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）制非圆管和接头.尺寸要求和试验（ISO 16611-2017）

BS ISO 25780-2011

Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin. Pipes with flexible joints intended to be installed using jacking techniques
压力和非压力供水、灌溉、排水或排污用塑料管道系统基于不饱和聚酯（UP）树脂的玻璃纤维增强热固性塑料（GRP）系统拟采用顶升技术安装的带有柔性接头的管道

Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques
压力和非压力供水、灌溉、排水或污水用塑料管道系统——基于不饱和聚酯（UP）树脂的玻璃纤维增强热固性塑料（GRP）系统——拟采用顶升技术安装的带挠性接头的管道

DIN EN 1115-6-DRAFT

Draft Document - Plastics piping systems for underground drainage and sewerage under pressure; glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP); part 6: recommended practice for installation; German version prEN 1115-6:1993
文件草案——压力下地下排水和排污用塑料管道系统；基于聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）；第6部分:安装推荐规程；德文版prEN 1115-6:1993

GOST R ISO 10467-2013

Трубопроводы из армированных стекловолокном термореактопластов на основе ненасыщенных полиэфирных смол для напорной и безнапорной канализации и дренажа. Общие технические требования
基于不饱和聚酯树脂的玻璃增强热固性塑料管道系统用于压力和非压力排水和覆盖一般技术要求

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统