现行

ASTM F3537-21

Standard Guide for Respirator Fit Testing Methods
呼吸器配合试验方法的标准指南

2021-11-01

现行

ASTM F3407-21

Standard Test Method for Respirator Fit Capability for Negative-Pressure Half-Facepiece Particulate Respirators
负压半面罩微粒呼吸器的呼吸器安装能力的标准试验方法

2021-11-01

现行

BS EN 17199-1-2019

Workplace exposure. Measurement of dustiness of bulk materials that contain or release respirable NOAA and other respirable particles-Requirements and choice of test methods
工作场所暴露 测量含有或释放可吸入NOAA和其他可吸入颗粒物的散装材料的含尘量 试验方法的要求和选择

2019-04-02

现行

ASTM D4532-22

Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
使用旋风采样器对工作场所大气中可吸入粉尘的标准试验方法

2022-11-15

现行

DIN EN 17199-1

Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA and other respirable particles - Part 1: Requirements and choice of test methods
工作场所暴露.含有或释放可吸入NOAA和其他可吸入颗粒物的散装材料的粉尘测量.第1部分:要求和试验方法的选择

2019-12-01

现行

ASTM D7948-20

Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
通过红外光谱法测量工作场所空气中可吸入结晶二氧化硅的标准测试方法

2020-03-01

现行

JIS T 9002-2021

Performance requirements and test methods of filtering facepiece respirators for infection control at medical use
医用感染控制过滤式口罩的性能要求和试验方法

2021-01-01

现行

GOST R 22.9.26-2015

Безопасность в чрезвычайных ситуациях. Средства индивидуальной защиты органов дыхания. Респираторы газопылезащитные. Методы испытаний
紧急情况下的安全呼吸系统保护手段呼吸器灰尘和气体 测试方法

现行

AS 2888.3-2002

Methods of testing plastics waste fittings, Method 3: Methods for pressure testing of plastics waste fittings
塑料废料配件的试验方法 方法3:塑料废料配件的压力试验方法

2002-06-17

现行

AS/NZS 1462.11-1996

Methods of test for PVC pipes and fittings, Method 11: Method for high temperature stress-relief testing of fittings
PVC管和配件的试验方法 方法11:配件的高温应力消除试验方法

1996-04-05

现行

AS/NZS 1462.1-2006[ Pending Revision ]

Methods of test for plastics pipes and fittings, Method 1: Method for determining the dimensions of pipes and fittings
塑料管道和配件的试验方法 方法1:管道和配件尺寸的测定方法

2006-03-20

现行

UNE 97321-1989 ERRATUM

DOOR FITTINGS. LOCKS. TEST METHODS
门配件 锁 测试方法

1989-06-14

现行

UNE 97321-1988

DOOR FITTINGS. LOCKS. TEST METHODS
门配件 锁 测试方法

1988-12-30

现行

AS 2888.4-2002

Method of testing plastics waste fittings, Method 4: Method for air pressure/vacuum testing of plastics waste fittings
塑料废料配件的试验方法 方法4:塑料废料配件的气压/真空试验方法

2002-06-17

现行

AS 2888.9-2002

Methods of testing plastics waste fittings, Method 9: Method for determining residual stress in plastics waste fittings
塑料废料配件的试验方法 方法9:塑料废料配件中残余应力的测定方法

2002-06-17

现行

AS/NZS 1462.2-2006

Methods of test for plastics pipes and fittings, Method 2: Method for determining the flattening properties of plastics pipes and fittings
塑料管道和配件的试验方法 方法2:塑料管道和配件压扁性能的测定方法

2006-02-22

现行

BS EN 274-2-2002

Waste fitting for sanitary appliances-Test methods
卫生器具的废物配件 测试方法

2004-02-16

现行

KS M ISO 7686

플라스틱 관 및 이음관－불투명도－시험 방법
塑料管及管件不透明度试验方法

2016-12-27

现行

KS M ISO 7686(2021 Confirm)

플라스틱 관 및 이음관－불투명도－시험 방법
塑料管道和管件不透明度试验方法

2016-12-27

现行

GB/T 14514-2013

气动管接头试验方法
Test methods of pneumatic fluid power fittings

2013-09-18