现行

DOD DOD-S-63275A

STUD, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC & RING, LOCK, SERRATED, METRIC, GENERAL SPECIFICATION FOR (SUPERSEDING DOD-S-63275)
米制和米制带齿锁紧环锁紧锁紧内螺纹双头螺栓通用规范（替代DOD-S-63275）

1982-10-29

现行

MIL MS51991D Amendment 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated
插入件 螺纹锁定 环锁定 锯齿形

2015-08-20

现行

MIL MS51991D

Insert, Screw Thread-Locked in, Ring Locked, Serrated
镶块 螺纹锁紧 环锁紧 锯齿形

2012-11-14

现行

MIL MS51991D Notice 1-Validation 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated
插入件 螺纹锁定 环锁定 锯齿形

2020-05-26

现行

MIL MS51993B Notice 1-Validation 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入 螺纹锁定 锁定 锯齿 高强度

2019-02-15

现行

MIL MS51991C Amendment 1

INSERT, SCREW THREAD - LOCKED IN, RING LOCKED, SERRATED (SUPERSEDING MS51991B)
锯齿形锁紧环内螺纹嵌件（取代MS51991B）

1997-08-06

现行

MIL MS51993B

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入件 螺纹锁定 环锁定 锯齿状 高强度

2012-11-01

现行

MIL MS51993B Amendment 1(amendment incorporated)

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入件 螺纹锁定 环锁定 锯齿状 高强度

2014-02-04

现行

MIL MIL-DTL-45910D

Insert, Screw Thread-Locked in and Ring Locked, Serrated General Specification for
螺纹锁紧和环锁紧锯齿嵌件通用规范

2015-06-18

现行

MIL MIL-DTL-45910D Notice 1-Validation 1

Insert, Screw Thread-Locked in and Ring Locked, Serrated General Specification for
带锯齿的螺纹锁紧和环锁紧嵌件通用规范

2020-06-25

现行

DOD DOD-I-63276/1A

INSERT, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC (SUPERSEDING DOD-I-63276/1)
米制锁紧环锁紧螺纹嵌件（替代DOD-I-63276/1）

1983-10-21

现行

MIL MS51998 Notice 4-Validation 4

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
插入件 螺纹锁定 环锁定 锯齿状 设计和使用限制

2019-07-24

现行

MIL MS51998 Notice 1-Validation 1

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
插入件 螺纹锁定 环锁定 锯齿状 设计和使用限制

1988-05-10

现行

MIL MS51998 Notice 2-Validation 2

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
插入件 螺纹锁定 环锁定 锯齿状 设计和使用限制

2001-09-14

现行

MIL MS51998

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
嵌件 螺纹锁紧 环锁紧 锯齿形 设计和使用限制

1967-12-12

现行

MIL MS51551 Notice 1-Inactivation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
螺柱 锁定在环内 锯齿状 无螺纹螺母端 增加螺柱端长度

1998-01-19

现行

MIL MS51551

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
锁紧螺柱-环形锁紧 锯齿形 UNJF螺纹螺母端 增加螺柱端长度

1987-05-12

现行

MIL MS51551 Notice 2-Validation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
螺柱 锁定在环内 锯齿状 无螺纹螺母端 增加螺柱端长度

2019-06-11

现行

DOD DOD-I-63276A

INSERT, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC, GENERAL SPECIFICATION FOR (SUPERSEDING DOD-I-63276)
米制锁紧环锁紧螺纹嵌件通用规范（替代DOD-I-63276）

1983-10-21

现行

MIL MS51498 Amendment 1

INSERT,SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
插入件 螺纹锁紧 环锁紧 锯齿状 高强度 超大更换件

1997-08-06