IEC 60695-2-12:20 21 RLV包含官方IEC国际标准及其红线版本。Redline版本仅有英文版本，为您提供了一种快速简便的方法来比较官方IEC标准与其上一版之间的所有变化。 IEC 60695-2-12:20 21规定了适用于固体电绝缘材料或其他固体材料试样的可燃性测试，以确定辉光线可燃性指数(GWFI)。GWFI是在该标准化程序中确定的最高温度，在该温度下，测试材料不会点燃，或者如果点燃，在移除辉光线后30秒内熄灭，并且没有完全消耗；并且如果发生熔融液滴，则不会点燃包裹组织。本试验方法是在一系列标准试件上进行的材料试验。获得的数据以及来自材料辉光线点火温度(GWIT)测试方法IEC 60695-2-13的数据可用于根据IEC 60695-1-30[4]的预选过程中，以判断材料满足IEC 60695-2-11要求的能力。本基本安全性出版物侧重于安全性测试方法，主要供技术委员会根据IEC指南104和ISO/IEC指南51中规定的原则编写安全性出版物时使用。技术委员会的职责之一是在适用的情况下，在编制其出版物时利用基本安全出版物。本出版物应与IEC 60695-2-10.本第三版取消并取代了2010年出版的第二版和修正案1:20 14。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更: a)第3条增加了关于时间和持续时间的新术语和定义，对试验方法的应用有影响。

IEC 60695-2-12:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.

IEC 60695-2-12:2021 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for flammability testing to determine the glow-wire flammability index (GWFI). GWFI is the highest temperature, determined during this standardized procedure, at which the tested material does not ignite or, if it does, extinguishes within 30 s after removal of the glow-wire and is not totally consumed; and molten drips, if they occur, do not ignite the wrapping tissue. This test method is a materials test carried out on a series of standard test specimens. The data obtained, along with data from the glow-wire ignition temperature (GWIT) test method for materials, IEC 60695-2-13, can then be used in a preselection process in accordance with IEC 60695-1-30 [4] to judge the ability of materials to meet the requirements of IEC 60695-2-11. This basic safety publication focusing on safety test method(s) is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This publication is to be read in conjunction with IEC 60695-2-10. This third edition cancels and replaces the second edition published in 2010 and Amendment 1:2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) New terms and definitions with regards to times and durations have been added to Clause 3, with an effect on the application of the test method.