本SAE推荐规程旨在作为标准试验的定义，该标准试验可能会频繁变化，以跟上经验和技术进步的步伐。在考虑其用途时，应牢记这一点。 本SAE推荐规程的具体目的是定义一种程序，以确定摩擦材料的固有财产，例如特定疲劳试验压力下的压缩模量和回弹/恢复时间。该试验的结果将独立地表征摩擦材料，并作为压缩疲劳试验的输入。 注:如果本试验旨在确定压缩疲劳试验的回弹间隔，则必须在考虑未来疲劳试验水平的情况下选择本程序中的最大试验压力（Pmax）。重要的是，在最大施加压力下，回弹时间足够长，以允许材料回弹至其原始厚度。 建议采用标准报告流程。本程序适用于湿摩擦材料的供应商和最终用户。

This SAE Recommended Practice is intended as the definition of a standard test, which may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The specific purpose of this SAE Recommended Practice is to define a procedure to determine intrinsic properties of friction materials such as compressive modulus and rebound/recovery time at specific fatigue test pressures. Results from this test will both independently characterize the friction material and serve as input to the compression fatigue test. NOTE: If this test is intended to determine the rebound interval for the compression fatigue test, then the maximum test pressure (Pmax) in this procedure must be selected with future fatigue testing levels in mind. It is important that the rebound time is sufficient at the maximum apply pressure to allow the matieral to rebound back to its original thickness. Standard reporting processes are recommended. This procedure is intended for use by both suppliers and end users of wet friction materials.