BS PD CEN/TR 15316-6-1:2017参考标准EN 15316-1:2017，模块M3-1、M8-1、M3-4、M8-4、M3-9， M8-9。它包含支持正确理解、使用和国家适应标准的信息 EN 15316-1:2017。本技术报告不包含任何规范性规定。相关标准EN 15316-1:2017是计算能源使用和 供暖和家用热水系统的能源性能。这个标准只针对 由水基系统提供的加热、生活热水和冷却所需的热量（例如:。 吸收式制冷机）。它指定了如何使用计算模块执行整个安装的计算（请参见 图1）对应于各标准中定义的方法。它处理操作条件计算和能源性能指标等常见问题。它将输入和输出标准化，以实现通用的欧洲计算方法。它允许对供暖和生活热水系统及子系统进行能量分析，包括 通过比较系统损耗和定义 能源绩效指标。性能分析允许在系统和子系统之间进行比较，并使 可以评估每个子系统的影响- 系统对建筑物能量性能的影响。加热子系统各部分的系统损失计算见下文 标准。本标准不包括通风系统（例如，具有热回收功能的平衡系统），但如果 空气被预热或安装了空气加热系统，这些系统向空气处理机组（空气处理机组）提供热量 本标准涵盖了搬运装置）。交叉引用:15/30325699 DC EN ISO 13790（ISO 13790:2008）ASCEN/TS 16629:2014EN 15241:2007（TC 156 WI00156078）。购买本文件时可获得的所有当前修订均包括在购买本文件中。

BS PD CEN/TR 15316-6-1:2017 refers to standard EN 15316-1:2017, modules M3-1, M8-1, M3-4, M8-4, M3-9, M8-9.It contains information to support the correct understanding, use and national adaptation of standard EN 15316-1:2017.This Technical Report does not contain any normative provision.The related standard EN 15316-1:2017 is the general frame for the calculation of the energy use and the energy performance of heating and domestic hot water systems. This standards is only dealing with the heat, provided by water based systems, needed for heating, domestic hot water and cooling (e.g. absorption chiller).It specifies how to perform the calculation of the entire installation using the calculation modules (see Figure 1) corresponding to the methods defined in the respective standards.It deals with common issues like operating conditions calculation and energy performance indicators.It standardises the inputs and outputs in order to achieve a common European calculation method.It allows the energy analysis of the heating and Domestic hot water systems and sub-systems including control (emission, distribution, storage, generation) by comparing the system losses and by defining energy performance indicators.The performance analysis allows the comparison between systems and sub-systems and makes possible to evaluate the impact of each sub-system on the energy performance of a building.The calculation of the system losses of each part of the heating sub-systems is defined in subsequent standards.Ventilation systems are not included in this standard (e.g. balanced systems with heat recovery), but if the air is preheated or an air heating system is installed, the systems providing the heat to the AHU (Air Handling Unit) are covered by this standard.Cross References:15/30325699 DC EN ISO 13790 (ISO 13790:2008) ASCEN/TS 16629:2014EN 15241:2007 (TC 156 WI00156078)All current amendments available at time of purchase are included with the purchase of this document.