首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
历史 ASTM C91/C91M-12
到馆提醒
收藏跟踪
购买正版
Standard Specification for Masonry Cement 砌体水泥标准规范
发布日期: 2012-04-01
1.1本规范涵盖了三种类型的砌筑水泥,用于需要砌筑砂浆的地方。 1.2 单位 — 以国际单位制或英寸-磅单位表示的数值应单独视为标准值。每个系统中规定的值可能不是精确的等效值;因此,每个系统应相互独立使用。将两个系统的值合并可能会导致不符合标准。国际单位制数值应通过国际单位制测量或适当转换获得,使用标准中给出的转换和舍入规则 ,以其他单位进行的测量。当实际中未使用英寸-磅单位时,数值仅以国际单位制表示。 1.3本标准的文本是指提供解释性材料的注释和脚注。 这些注释和脚注(不包括表和图中的注释和脚注)不应视为本标准的要求。 1.4 以下安全隐患警告仅适用于本规范第16节和第17节。 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。 ( 警告 新鲜的水硬性胶结混合物具有腐蚀性,长时间接触可能会导致皮肤和组织化学烧伤。)
1.1 This specification covers three types of masonry cement for use where mortar for masonry is required. 1.2 Units — The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Values in SI units shall be obtained by measurement in SI units or by appropriate conversion, using the Rules for Conversion and Rounding given in Standard , of measurements made in other units. Values are stated in only SI units when inch-pound units are not used in practice. 1.3 The text of this standard refers to notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.4 The following safety hazards caveat pertains only to Sections 16 and 17 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ( Warning Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.)
分类信息
关联关系
研制信息
归口单位: C01.11
相似标准/计划/法规
现行
ASTM C91/C91M-23
Standard Specification for Masonry Cement
砌筑水泥标准规范
2023-01-01
现行
GOST 25328-1982
Цемент для строительных растворов. Технические условия
石工水泥规格
现行
BS EN 413-1-2011
Masonry cement-Composition, specifications and conformity criteria
砌筑水泥
2011-06-30
现行
UNE-EN 413-1-2005
Masonry cement - Part 1: Composition, specifications and conformity criteria
砌筑水泥.第1部分:成分、规范和合格标准
2005-02-23
现行
ASTM C1780-24
Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer
水泥基粘结砌体单板安装方法的标准实施规程
2024-06-01
现行
ASTM C476-23
Standard Specification for Grout for Masonry
砌体灌浆标准规范
2023-02-01
现行
ASTM C404-24
Standard Specification for Aggregates for Masonry Grout
砌体灌浆用集料的标准规范
2024-01-15
现行
ASTM C144-18
Standard Specification for Aggregate for Masonry Mortar
砌体砂浆骨料标准规范
2018-12-01
现行
ASTM C1384-23
Standard Specification for Admixtures for Masonry Mortars
砖石灰浆掺合料的标准规范
2023-12-01
现行
ASTM C270-24
Standard Specification for Mortar for Unit Masonry
砌块用灰浆标准规范
2024-06-15
现行
ASTM C901-18
Standard Specification for Prefabricated Masonry Panels
预制砖石标准规范
2018-09-01
现行
ASTM C150/C150M-24
Standard Specification for Portland Cement
硅酸盐水泥标准规范
2024-07-01
现行
ASTM C10/C10M-24
Standard Specification for Natural Cement
天然水泥标准规范
2024-01-01
现行
ASTM C1329/C1329M-23
Standard Specification for Mortar Cement
砂浆水泥标准规范
2023-01-01
现行
ASTM C207-24
Standard Specification for Hydrated Lime for Masonry Purposes
砌体用熟石灰标准规范
2024-06-01
现行
ASTM C129-23
Standard Specification for Nonloadbearing Concrete Masonry Units
非承重混凝土砌块标准规范
2023-12-01
现行
ASTM C1623-23
Standard Specification for Manufactured Concrete Masonry Lintels
人造混凝土砌体过梁标准规范
2023-12-01
现行
ASTM C1877-24
Standard Specification for Adhered Concrete Masonry Units
粘结混凝土砌块标准规范
2024-01-15
现行
ASTM C1825-19
Standard Guide for Developing Specifications for Masonry Units
砌块规范制定的标准指南
2019-12-01
现行
ASTM C90-24
Standard Specification for Loadbearing Concrete Masonry Units
承重混凝土砌块标准规范
2024-06-15