CISPR 11:20 15可作为CISPR 11:20 15获得 包含国际标准及其红线的RLV 版本，显示技术内容与 上一版。 CISPR 11:20 15适用于工作在0 Hz至400 GHz频率范围内的工业、科学和医疗电气设备，以及设计用于产生和/或使用本地射频能量的家用和类似电器。本标准涵盖了与频率范围为9 kHz至400 GHz的射频(RF)干扰相关的发射要求。测量只需在第6条规定了限值的频率范围内进行。对于ITU无线电法规（见定义3.13）中定义含义内的ISM RF应用，本标准涵盖了与无线电相关的发射要求-9 kHz至18 GHz频率范围内的频率干扰。在ITU无线电法规定义的ISM频带内工作的ISM RF照明设备和UV辐照器的要求包含在本标准中。其他CISPR产品和产品系列排放标准涵盖的设备不在本标准范围内。本第六版取消并取代了2009年出版的第五版及其2010年出版的修正案1。它构成技术修订。它介绍并允许对电力电子设备、系统和装置的部件进行型式试验。其排放限值现在适用于低压（LV）交流电。和华盛顿。电源端口，与电源传输方向无关。几个限度适应了在测试地点发现的实际测试条件。它们现在也适用于用于无线电力传输(WPT)的电力电子ISM RF设备，用于即时供电和充电目的。1 GHz至18 GHz范围内的限制现在以类似、统一和技术中立的方式适用于连续波型干扰和波动干扰。对于这些测量，有两种可供选择的测量方法，即传统的log-AV方法和新的APD方法。根据IEC指南107《电磁兼容性-电磁兼容性出版物起草指南》（2014年），它具有产品系列EMC标准的地位。 本合并版本由第六版（2015年）组成 及其修正案1（2016）。因此，无须在 本出版物的补充。

CISPR 11:2015 is available as CISPR 11:2015 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

CISPR 11:2015 applies to industrial, scientific and medical electrical equipment operating in the frequency range 0 Hz to 400 GHz and to domestic and similar appliances designed to generate and/or use locally radio-frequency energy. This standard covers emission requirements related to radio-frequency (RF) disturbances in the frequency range of 9 kHz to 400 GHz. Measurements need only be performed in frequency ranges where limits are specified in Clause 6. For ISM RF applications in the meaning of the definition found in the ITU Radio Regulations (see Definition 3.13), this standard covers emission requirements related to radio-frequency disturbances in the frequency range of 9 kHz to 18 GHz. Requirements for ISM RF lighting equipment and UV irradiators operating at frequencies within the ISM frequency bands defined by the ITU Radio Regulations are contained in this standard. Equipment covered by other CISPR product and product family emission standards are excluded from the scope of this standard. This sixth edition cancels and replaces the fifth edition published in 2009 and its Amendment 1 published in 2010. It constitutes a technical revision. It introduces and permits type testing on components of power electronic equipment, systems and installations. Its emission limits apply now to low voltage (LV) a.c. and d.c. power ports, irrespective of the direction of power transmission. Several limits were adapted to the practical test conditions found at test sites. They are also applicable now to power electronic ISM RF equipment used for wireless power transfer (WPT), for instant power supply and charging purposes. The limits in the range 1 GHz to 18 GHz apply now to CW-type disturbances and to fluctuating disturbances in a similar, uniform and technology-neutral way. For these measurements, two alternative methods of measurement are available, the traditional log-AV method and the new APD method. It has the status of a Product Family EMC standard in accordance with IEC Guide 107, Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications (2014). This consolidated version consists of the sixth edition (2015) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication.