BS EN 1426:2015规定了测定沥青和沥青混合料稠度的方法 活页夹。正常程序适用于（330×0.1）mm以下的贯穿件，但适用于该深度以上的贯穿件 数值高达（500×0.1）mm，需要不同的操作参数。警告-使用本欧洲标准可能涉及危险材料、操作和安全 设备本欧洲标准并非旨在解决所有相关的安全问题 与它的使用。本欧洲标准的用户有责任制定适当的标准 安全和健康实践，并在使用前确定监管限制的适用性。交叉引用:EN 58EN 1425EN 1427EN 10088-3EN 12594EN 12597EN ISO 6508-1ISO 6508-1EN ISO 286-1ISO 286-1EN ISO 1101ISO 1101EN ISO 1302ISO 1302购买本文件时提供的所有现行修订版均包含在购买本文件中。

BS EN 1426:2015 specifies a method for determining the consistency of bitumen and bituminous binders. Normal procedure is described for penetrations up to (330 × 0,1) mm, but for penetrations above this value, up to (500 × 0,1) mm, different operating parameters are necessary.WARNING - Use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.Cross References:EN 58EN 1425EN 1427EN 10088-3EN 12594EN 12597EN ISO 6508-1ISO 6508-1EN ISO 286-1ISO 286-1EN ISO 1101ISO 1101EN ISO 1302ISO 1302All current amendments available at time of purchase are included with the purchase of this document.