首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 KS B ISO 22915-20-2015(2020)
到馆提醒
收藏跟踪
购买正版
산업용 트럭-안정도 검사-제20부:사용에 의한 오프셋 하중의 특수 조건에서 트럭 작동에 대한 추가안정도 시험 工业用载重汽车稳定性的检验第20部分:在偏置负载特殊条件下工作的载重汽车附加稳定性试验
发布日期: 2015-12-30
该标准适用于KS B ISO 5053关于工业卡车稳定度的稳定度检查。此外,该标准适用于自主式或步行式工业卡车,轨道卡车除外。另外,适用于驾驶员操作、无人搬运、牵引、悬挂、推车、悬挂或装载在机架(rack)上的卡车。该标准明确了为检验载重卡车的稳定度而进行的附加试验,该试验产生了重力的负荷中心实质上偏离卡车长度方向中心面的特殊工作条件。
이 표준은 산업용 트럭의 안정도에 대하여 KS B ISO 5053에 관련된 안정도 검사에 적용한다.또한 이 표준은 자주식 또는 보행식 산업용 트럭에 적용하며 레일용 트럭은 제외한다.또한, 조종사 작동, 무인운반, 견인, 매달림, 밀차, 랙(rack)에 매달거나 적재하는 트럭에 적용된다.이 표준은 중력의 부하 중심이 실질적으로 트럭의 길이방향 중심면으로부터 오프셋되는 특별한 작동 조건이 생성되는 짐 싣는 트럭의 안정도 검사를 위한 추가적인 시험을 명시한다.
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
ISO 22915-20-2023
Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
工业卡车.稳定性验证.第20部分:在偏置负载的特殊条件下运行的卡车的附加稳定性试验
2023-03-24
现行
GB/T 26949.20-2016
工业车辆 稳定性验证 第20部分:在载荷偏置条件下作业的附加稳定性试验
Industrial trucks—Verification of stability—Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
2016-10-13
现行
AS 22915.20-2018
Industrial trucks - Verification of stability, Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization (ISO 22915-20:2008, MOD)
工业卡车.稳定性验证 第20部分:在利用率补偿的偏置负载特殊条件下运行的卡车的附加稳定性试验(ISO 22915-20-2008 MOD)
2018-10-17
现行
KS B ISO 22915-10(2020 Confirm)
산업용 트럭-안정도 검사-제10부:동력식 측면 스태킹의 특수 조건에서 트럭 작동에 대한 추가안정도 시험
工业货车稳定性验证第10部分:在动力装置横向移动负载的情况下 在特殊条件下操作的货车的附加稳定性试验
2015-12-30
现行
KS B ISO 22915-8
산업용 트럭 — 안정도 검사 — 제8부:마스트가 전방으로 기울어지고 하중이 상승한 상태에서 적재되는 특수 조건에서 작동되는 트럭의 추가 안정도 시험
工业卡车 - 稳定性验证 - 第8部分:在桅杆向前倾斜和负载抬升的特殊情况下运行的卡车的附加稳定性测试
2020-09-01
现行
ISO 22915-10-2023
Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
工业卡车.稳定性验证.第10部分:在用动力装置横向移动负载的特殊堆垛条件下工作的卡车的附加稳定性试验
2023-03-24
现行
ISO 22915-8-2018
Industrial trucks — Verification of stability — Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated
工业卡车 - 稳定性验证 - 第8部分:在桅杆向前倾斜和负载抬升的特殊情况下运行的卡车的附加稳定性测试
2018-09-19
现行
GB/T 26949.8-2022
工业车辆 稳定性验证 第8部分:在门架前倾和载荷起升条件下堆垛作业的附加稳定性试验
Industrial trucks—Verification of stability—Part 8 : Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated
2022-07-11
现行
GB/T 26949.10-2011
工业车辆 稳定性验证 第10部分:在由动力装置侧移载荷条件下堆垛作业的附加稳定性试验
Industrial trucks - Verification of stability - Part 10: Additional stability tests for trucks operating in the special conditions of stacking with load laterally displaced by powered devices
2011-07-19
现行
ISO 22915-12-2015
Industrial trucks — Verification of stability — Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer
工业用卡车 - 稳定性验证 - 第12部分:长度为6米(20英尺)长的货物集装箱的工业可变长度卡车
2015-01-19
现行
ISO 22915-9-2014
Industrial trucks — Verification of stability — Part 9: Counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer
工业卡车 - 稳定性的验证 - 9部分:平衡重卡车的6米(20英尺)的桅杆装卸货物集装箱的长度和更长的
2014-10-01
现行
AS 22915.10-2018
Industrial trucks - Verification of stability, Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices (ISO 22915-10:2008, MOD)
工业卡车.稳定性验证 第10部分:在由动力装置横向移动负载的特殊堆垛条件下运行的卡车的附加稳定性试验(ISO 22915-10-2008 MOD)
2018-11-09
现行
AS 22915.12-2018
Industrial trucks - Verification of stability, Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer (ISO 22915-12:2015, MOD)
工业卡车.稳定性验证 第12部分:装卸6米(20英尺)长及更长货运集装箱的工业可变到达卡车(ISO 22915-12-2015 MOD)
2018-10-17
现行
AS 22915.9-2018
Industrial trucks - Verification of stability, Part 9: Counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer (ISO 22915-9:2014, MOD)
工业卡车.稳定性验证 第9部分:带桅杆的平衡式卡车 装卸长度为6m(20ft)及以上的货运集装箱(ISO 22915-9-2014 MOD)
2018-10-17