ISO 10333的本部分规定了要求、试验方法、一般用途说明、标记、包装和包装 全身安全带（FBH）的维护。 FBH的主要用途是允许用户连接到个人防坠落系统（PFAS），该系统将 在未来的国际标准（见参考书目中的ISO 10333-6）中规定，如果发生逮捕， 制动力不得超过6 kN。 出于ISO 10333本部分的目的，FBH可能具有允许用户连接到网络的连接元件 其他类型的安全或访问系统，例如工作- 定位系统、受控下降/上升系统或 密闭空间进入系统。ISO 10333的本部分包括此类附件元件的要求。 ISO 10333的本部分仅适用于总质量不超过100 kg的单人FBH。 注:建议总质量（包括工具和设备）超过100 kg的坠落防护设备的使用者 就设备的适用性向设备制造商寻求建议，这可能需要额外的测试。 ISO 10333本部分的范围不包括: a） 腰带或胸前安全带:此类设备在个人防坠落系统中使用不安全 （PFAS）； b） 非主要设计用于PFAS的所有其他类型的线束； c） 用于受控下降/上升系统或受限空间的FBH的其他特殊要求 接入系统； d） 在受控环境中对FBH性能的兼容性或适用性进行的任何评估 下降/上升系统或受限空间进入系统。 ISO 10333的这一部分没有规定线束受到影响时适用的附加要求 特殊使用条件（例如，在进入工作场所方面存在不寻常的限制） 和/或特定环境因素）。因此，需要进行处理，以确保建筑材料的耐久性（例如 由于热处理、防腐处理、物理和化学危害防护）未在本规范中规定 是ISO 10333的一部分，但应符合适当的国际标准，否则应符合国家标准 以及其他涉及相关物理特性和/或用户安全的规范。 尤其是在 认为有必要测试设备金属部件的耐腐蚀性，应参考 ISO 9227。

This part of ISO 10333 specifies the requirements, test methods, instructions for general use, marking, packaging and maintenance for full-body harnesses (FBH). The main purpose of a FBH is to allow the user to connect into a personal fall-arrest system (PFAS), which will be specified in a future International Standard (see ISO 10333-6 in the Bibliography), such that if an arrest takes place, the arresting force will not exceed 6 kN. For the purposes of this part of ISO 10333, FBH may have attachment elements that allow the user to connect into other types of safety or access system, for example a work-positioning system, a controlled descent/ascent system or a confined-space access system. This part of ISO 10333 includes requirements for such attachment elements. This part of ISO 10333 is applicable only to FBH limited to single-person use of a total mass not exceeding 100 kg. NOTE Users of fall-protection equipment whose total mass (including tools and equipment) exceeds 100 kg are advised to seek advice from the equipment manufacturer regarding the suitability of the equipment, which may need additional testing. The scope of this part of ISO 10333 does not extend to: a) waist belts or chest harnesses: such equipment is not considered as safe to use in personal fall-arrest systems (PFAS); b) all other types of harnesses that are not designed primarily for use in PFAS; c) other special requirements for FBH, peculiar to use in a controlled descent/ascent system or a confined-space access system; d) any assessment of compatibility or suitability in respect of the performance of FBH in a controlled descent/ascent system or a confined-space access system. This part of ISO 10333 does not specify those additional requirements that would apply when harnesses are subjected to special conditions of use (where, for example, there exist unusual limitations concerning access to the place of work and/or particular environmental factors). Thus treatments to ensure the durability of the materials of construction (such as heat treatment, anti-corrosion treatment, protection against physical and chemical hazards) are not specified in this part of ISO 10333, but should comply with appropriate International Standards or, failing that, with national standards and other specifications dealing with relevant physical characteristics and/or the safety of users. In particular, when it is considered necessary to test the corrosion resistance of metallic parts of the equipment, reference should be made to ISO 9227.