1.1 这些表格列出了46-64号身材的成熟大男人的身体尺寸。虽然这些都是身体尺寸，但在考虑面料类型、身体运动舒适度、造型和合身度等因素时，它们可以作为设计该尺寸范围内大男人服装的基准。 1.2 这些表格列出了各种大男人尺码的身体尺寸。 1.3 以国际单位制或英寸-磅单位表示的数值应单独视为标准值。每个系统中规定的值可能不是精确的等效值；因此，每个系统应相互独立使用。将两个系统的值合并可能会导致不符合标准。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。 本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 身体测量信息的使用 表1和 2. 将协助制造商开发符合感兴趣人群当前人体测量特征的图案和服装。 反过来，这种做法应该减少或最小化消费者对服装尺码的困惑和不满。（另请参阅ISO 3635。） 4.2 Alvanon，股份有限公司创建了三维头像，描绘了特定尺寸的每个大男人的尺寸，并将其包含在这些表格中，以帮助制造商可视化由中的测量图表生成的姿势、形状和比例 无花果。1- 3. . 图1 成熟的大男人 图2 成熟的大男人 图3 成熟的大男人

1.1 These tables list body measurements of mature big men figure type sizes 46–64. Although these are body measurements, they can be used as a baseline in designing apparel for big men in this size range when considering such factors as fabric type ease for body movement, styling, and fit. 1.2 These tables list body measurements for the complete range of big men sizing. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 The use of the body measurement information in Tables 1 and 2 will assist manufacturers in developing patterns and garments that are consistent with the current anthropometric characteristics of the population of interest. This practice should, in turn, reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO 3635.) 4.2 Three-dimensional avatars depicting each of the big men sizes on certain measurements were created by Alvanon, Inc. and included in these tables to assist manufacturers in visualizing the posture, shape, and proportions generated by the measurements charts in Figs. 1- 3 . FIG. 1 Mature Big Men FIG. 2 Mature Big Men FIG. 3 Mature Big Men