Guide for the statistical analysis of ageing test data-Validation of procedures for statistical analysis of censored normally distributed data
老化试验数据的统计分析指南 删失正态分布数据统计分析程序的验证

2016-04-30

Guide for the statistical analysis of ageing test data - Part 2: Validation of procedures for statistical analysis of censored normally distributed data
老化试验数据统计分析指南第2部分:截尾正态分布数据统计分析程序的验证

2010-03-30

老化试验数据统计分析导则 第2部分：截尾正态分布数据统计分析的验证程序
Guide for the statistical analysis of ageing test data—Part 2: Validation of procedures for statistical analysis of censored normally distributed data

2015-07-03

Guide for the statistical analysis of ageing test data - Part 1: Methods based on mean values of normally distributed test results
老化测试数据统计分析指南 - 第1部分:基于正态分布测试结果平均值的方法

2011-12-14

노화 시험 데이터의 통계적 분석 지침 — 제1부 : 정규 분포된 시험 결과 평균값에 의한 방법
老化测试数据统计分析指南 - 第1部分:基于正态分布测试结果平均值的方法

2019-05-21

GUIDE FOR THE STATISTICAL ANALYSIS OF AGEING DATA. METHODS BASED ON MEAN VALUES OF NORMALLY DISTRIBUTED TEST DATA
老龄化数据统计分析指南 基于正态分布测试数据平均值的方法

1978-04-15

BS EN 60493-1. Guide for the statistical analysis of ageing test data. Part 1. Methods based on mean values of normally distributed test results
英国标准EN 60493-1 老化试验数据的统计分析指南 第一部分 基于正态分布测试结果平均值的方法

2011-03-09

Guide for the statistical analysis of ageing test data-Methods based on mean values of normally distributed test results
老化试验数据的统计分析指南

2012-02-29

Methods of test for adhesives. Sampling and analysis of test data-Guide to statistical analysis
胶粘剂的试验方法 测试数据的取样和分析 统计分析指南

1976-11-30

Draft Document - Guide for the statistical analysis of ageing test data - Part 1: Methods based on mean values of normally distributed test results (IEC 112/172/CDV:2011)
文件草案.老化试验数据统计分析指南.第1部分:基于正态分布试验结果平均值的方法（IEC 112/172/CDV:2011）

2011-05-01

Guidelines for the statistical analysis of ageing test data - Part 3: Minimum specimen numbers at different test conditions with given experimental data
老化试验数据统计分析指南.第3部分:给定试验数据的不同试验条件下的最小试样数量

2017-05-11

老化试验数据统计分析导则 第3部分：给定试验数据的不同试验条件下的最少试样数量
Guidelines for the statistical analysis of ageing test data—Part 3: Minimum specimen numbers at different test conditions with given experimental data

2023-09-07

无菌医疗器械包装试验方法　第1部分：加速老化试验指南
Test methods for sterile medical device package—Part 1:Test guide for accelerated aging

2018-12-20

IEEE Simplified Method for Calculation of the Regression Line (Appendix to IEEE Guide for the Statistical Analysis of Thermal Life Test Data, IEEE Std 101-1972)
IEEE回归线计算的简化方法（IEEE热寿命试验数据统计分析指南附录 IEEE Std 101-1972）

1973-11-30

聚合物基复合材料疲劳性能测试方法 第2部分：线性或线性化应力寿命（S-N）和应变寿命（ε-N）疲劳数据的统计分析
Test method for fatigue properties of polymer matrix composite materials -Part 2: Statistical analysis of linear or linearized stress-life(S-N) and strain-life(ε-N) fatigue data

2017-12-29

Semiconductor devices - Part 18-1: Semiconductor bio sensors - Test method and data analysis for calibration of lens-free CMOS photonic array sensors
半导体器件第18-1部分:半导体生物传感器无透镜CMOS光子阵列传感器校准的试验方法和数据分析

2019-05-20

Indexing Fracture Toughness Data; Part 1: Results from the MPC Cooperative Test Program on the Use of Precracked Charpy Specimens for T0 Determination; Part 2: Fracture Data Analysis using ASTM Standards E1921-97 and E1921-02; Part 3: Fracture Toughness Data Analysis using the Master Curve Method
索引断裂韧性数据；第1部分:MPC合作试验项目关于使用预裂纹夏比试样测定T0的结果；第2部分:使用ASTM标准E1921-97和E1921-02进行断裂数据分析；第3部分:主曲线法断裂韧度数据分析

Electrical insulating materials - Thermal endurance properties - Part 7-2: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) - Results of the round robin tests to validate procedures of IEC TS 60216-7-1 by non-isothermal kinetic analysis of thermogravimetric data
电绝缘材料.耐热性能.第7-2部分:使用分析试验方法（RTEA）加速测定相对耐热性.通过热重数据的非等温动力学分析验证IEC TS 60216-7-1程序的循环试验结果

2024-09-19

Electrical insulating materials - Thermal endurance properties - Part 7-2: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) - Results of the round robin tests to validate procedures of IEC TS 60216-7-1 by non-isothermal kinetic analysis of thermogravimetric data
电绝缘材料.耐热性能.第7-2部分:使用分析试验方法（RTEA）加速测定相对耐热性.通过热重数据的非等温动力学分析验证IEC TS 60216-7-1程序的循环试验结果

2024-09-19