BS EN 50131-2-10:2018规定了1至4级（见EN 50131-1）特定或非特定的安全等级 或无线锁定状态触点，并包括四个环境等级的要求，包括 EN 50130-5规定的内部和室外应用。锁状态触点安装在车窗或车门、车窗或门框中，以便监控 仅锁定/解锁状态，或锁定/解锁状态与车窗/车门的打开/关闭状态组合 同时，也同样位于受监管的场所。 它们提供了必要的信号范围 或其他入侵报警系统使用的消息。探测器满足规定等级的所有要求。本欧洲标准中规定的强制性功能之外的功能可包括在 探测器，前提是它们不会影响强制功能的正确运行。锁定状态触点的两个独立单元的组合在本欧洲标准正文中有所提及 作为探测器的标准。本欧洲标准不适用于系统互连。 交叉引用:EN 10130EN 50130-5EN 50130-4EN 50131-1IEC 60529EN 60529EN 50131（所有部分）EN 50131-2（所有部分）IEC 60404-14IEC 60404-8-1IEC 60404-5EN 60404-5EN 60404-14购买本文件时提供的所有当前修改件均包括在内。

BS EN 50131-2-10:2018 provides for security grades 1 to 4, (see EN 50131-1) specific or non-specific wired or wire-free lock state contacts, and includes the requirements for four environmental classes covering applications in internal and outdoor locations as specified in EN 50130-5.Lock state contacts are installed in windows or doors and windows or doorframes to allow to monitor the lock/unlock status only or the lock/unlock status combined with the open/close status of a window/door simultaneously and are as such located in supervised premises. They provide the necessary range of signals or messages to be used by the rest of the intrusion alarm system.A detector fulfils all the requirements of the specified grade.Functions additional to the mandatory functions specified in this European Standard may be included in the detector, providing they do not influence the correct operation of the mandatory functions.The combination of the two separate units of the lock state contact is referred to in the body of this European Standard as the detector.This European Standard does not apply to system interconnections.Cross References:EN 10130EN 50130-5EN 50130-4EN 50131-1IEC 60529EN 60529EN 50131 (all parts)EN 50131-2 (all parts)IEC 60404-14IEC 60404-8-1IEC 60404-5EN 60404-5EN 60404-14All current amendments available at time of purchase are included with the purchase of this document.