BS EN 50131-2-7-3:2012+A2:2016适用于安装在建筑物和建筑物内的主动表面安装玻璃破裂探测器 提供1至4级安全等级（见EN 50131-1），特定或非特定有线或无线 探测器，并使用环境等级I至IV（见EN 50130-5）。这是欧洲标准 不包括户外使用的主动表面安装玻璃破裂探测器的要求。探测器应满足规定等级的所有要求。本标准中规定的强制性功能之外的功能可包括在 探测器，前提是它们不会对强制功能的正确运行产生不利影响。本欧洲标准不适用于系统互连。交叉引用:EN 50130-4EN 50130-5EN 50131-1:2006EN 50131-6EN 60068-1:1994EN 60529IEC 60068-1:1988+A1:1992+勘误表1988EN 60529IEC 60529包含以下内容:修订，2014年7月。修订并替换BS EN 50131-2-7-3:2012。修正案，2016年6月。修订并替换BS EN 50131-2-7-3:2012+A1: 2013

BS EN 50131-2-7-3:2012+A2:2016 is for active surface mounted glass break detectors installed in buildings and provides for security Grades 1 to 4 (see EN 50131-1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130-5). This European Standard does not include requirements for active surface mounted glass break detectors intended for use outdoors.A detector shall fulfil all the requirements of the specified Grade.Functions additional to the mandatory functions specified in this standard may be included in the detector, providing they do not adversely influence the correct operation of the mandatory functions.This European Standard does not apply to system interconnections.Cross References:EN 50130-4EN 50130-5EN 50131-1:2006EN 50131-6EN 60068-1:1994EN 60529IEC 60068-1:1988+A1:1992+corrigendum Oct.:1988EN 60529IEC 60529Incorporates the following:Amendment, July 2014. Amends and replaces BS EN 50131-2-7-3:2012. Amendment, June 2016. Amends and replaces BS EN 50131-2-7-3:2012+A1:2013