1.1 本安全规范旨在减少与独立式衣物存放装置倾翻相关的危险对儿童的伤害和死亡，包括但不限于箱柜、抽屉柜、抽屉柜、衣柜、薄呢、写字台、门柜和梳妆台，27英寸。（686毫米）及以上。 1.2 本安全规范不包括书架装置，如书柜或娱乐家具、办公家具、餐厅家具、珠宝衣柜、床底抽屉存储装置、非卧室使用的临时/特色家具、洗衣房存储/分拣装置、床头柜或拟永久附在建筑物上的内置装置，也不包括《消费者安全规范》中定义的“衣物储物箱” F2598 . 1.3 本安全规范旨在涵盖5岁以下的儿童。 2. 1.4 本安全规范取代PS 110–98。 1.5 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.6 以下安全隐患警告仅适用于测试程序部分第节 7. ，本安全规范: 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This safety specification is intended to reduce injuries and deaths of children from hazards associated with tipover of free-standing clothing storage units, including but not limited to chests, chests of drawers, drawer chests, armoires, chifferobes, bureaus, door chests and dressers, 27 in. (686 mm) and above in height. 1.2 This safety specification does not cover shelving units, such as bookcases or entertainment furniture, office furniture, dining room furniture, jewelry armoires, underbed drawer storage units, occasional/accent furniture not intended for bedroom use, laundry storage/sorting units, nightstands, or built-in units intended to be permanently attached to the building, nor does it cover “Clothing Storage Chests” as defined in Consumer Safety Specification F2598 . 1.3 This safety specification is intended to cover children up to and including age five. 2 1.4 This safety specification replaces PS 110–98. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following safety hazards caveat pertains only to the test procedure portion, Section 7 , of this safety specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.