本欧洲标准与第1部分一起处理基础设备按预期使用和在与机器的整个使用寿命相关的制造商合理预见的误用条件下的所有重大危害（见第4条）。 本部分的要求是对EN 16228 1:2014中制定的共同要求的补充 本文件不重复EN 16228 1:2014的要求，但增加或取代了基础设备申请的要求。 在本文件中，“基础设备”一词涵盖了用于通过钻孔（旋转扭矩大于35 kNm的机器）进行安装和/或提取的几种不同类型的机器，驱动，振动，推动，拉动或技术组合或任何其他方式: - 纵向基础元素; - 通过振动和土壤混合技术进行土壤改良; - 垂直排水 注意一些基础设备可能具有额外的旋转头，其扭矩小于35kNm用于预钻孔应用;本设备符合本标准。 具有以下一个或多个特性的机器不在本标准的范围内，但符合EN 16228 2: - 具有主旋转头扭矩的机器

This European Standard, together with part 1, deals with all significant hazards for foundation equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014 This document does not repeat the requirements from EN 16228 1:2014 but adds or replaces the requirements for application for foundation equipment. In this document the general term “foundation equipment” covers several different types of machines used for installation and/or extracting by drilling (machines with a rotary torque greater than 35 kNm), driving, vibrating, pushing, pulling or a combination of techniques, or any other way, of: — longitudinal foundation elements; — soil improvement by vibrating and soil mixing techniques; — vertical drainage. NOTE Some foundation equipment may have an additional rotary head with a torque less than 35 kNm for pre-drilling applications; this equipment is covered by this standard. Machines with one or more of the following characteristics are not covered by this standard, but are covered by EN 16228 2: — machines that have a main rotary head torque of less than 35 kNm; — machines that have multi-directional drilling capability; — machines for which adding and removing rods or digging and drilling tools etc. is usually required during the installation/extraction process. Typically the process of foundation techniques involves the installation of longitudinal elements such as concrete piles, steel beams, tubes and sheet piles, injection elements as tubes and hoses and casings for cast in situ.