现行

ISO 13955-1997

Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies
塑料管道和配件——聚乙烯（PE）电熔组件的破碎脱粘试验

1997-12-25

现行

BS ISO 13955-1997+A1-2020

Plastics pipes and fittings. Crushing decohesion test for polyethylene (PE) electrofusion assemblies
塑料管道和配件 聚乙烯（PE）电熔组件的破碎脱粘试验

2020-05-04

现行

GB/T 19806-2005

塑料管材和管件 聚乙烯电熔组件的挤压剥离试验
Plastics pipes and fittings Crushing decohesion test for polyethylene(PE)electrofusion assemblies

2005-03-23

现行

ISO 13955-1997/Amd 1-2020

Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies — Amendment 1
塑料管材和管件 聚乙烯电熔组件的挤压剥离试验

2020-04-20

现行

ISO 13954-1997

Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
塑料管道和配件——标称外径大于或等于90 mm的聚乙烯（PE）电熔组件的剥离剥离试验

1997-12-25

现行

BS ISO 13954-1997+A1-2020

Plastics pipes and fittings. Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
塑料管道和配件 标称外径大于或等于90 mm的聚乙烯（PE）电熔组件的剥离剥离试验

2020-05-06

现行

ISO 13954-1997/Amd 1-2020

Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm — Amendment 1
塑料管材和管件公称外径大于或等于90mm的聚乙烯（PE）电熔组件的剥离试验

2020-04-20

现行

ISO 13956-2010

Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
塑料管道和配件——聚乙烯（PE）鞍形熔合接头的脱粘试验——用撕裂试验评价熔合接头界面的延性

2010-09-22

现行

ISO 11413-2019

Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
塑料管件和配件 - 聚乙烯（Pe）管和电熔接头之间的试件组件的制备

2019-03-12

现行

BS ISO 11413-2019

Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
塑料管道和配件 聚乙烯（PE）管和电熔配件之间试件组件的制备

2019-03-13

现行

GB/T 19807-2005

塑料管材和管件 聚乙烯管材和电熔管件 组合试件的制备
Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting

2005-03-23

现行

ISO 11414-2009

Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
塑料管道和配件——通过对接熔合制备聚乙烯（PE）管/管或管/管件试件组件

2009-01-29

现行

GB/T 19809-2005

塑料管材和管件 聚乙烯（PE）管材/管材或管材/管件热熔对接组件的制备
Plastics pipes and fittings-Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion

2005-03-23

现行

BS ISO 11414-2009

Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
塑料管道和配件 通过对接熔合制备聚乙烯（PE）管/管或管/管件试件组件

2009-02-28

现行

GOST R ISO 11414-2014

Трубы и фитинги пластмассовые. Подготовка контрольного образца соединения труба/труба или труба/фитинг из полиэтилена (ПЭ), выполненного сваркой встык
塑料管材及配件 通过对接融合制备聚乙烯（PE）管/管或管/配件试件组件

现行

GB/T 19712-2005

塑料管材和管件 聚乙烯（PE）鞍形旁通抗冲击试验方法
Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance

2005-03-23

现行

ISO 13957-1997

Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance
塑料管道和配件——聚乙烯（PE）开孔三通——抗冲击性试验方法

1997-12-25

现行

BS 09/30180073 DC

BS ISO 13956. Plastics pipes and fittings. Determination of cohesive resistance. Tear test for polyethylene (PE) saddle assemblies
BS ISO 13956 塑料管道和配件 内聚阻力的测定 聚乙烯（PE）鞍座组件的撕裂试验

2009-06-26

现行

AS/NZS 1462.25-2005

Methods of test for plastics pipes and fittings, Method 25: Determination of slow-crack-growth of PE (polyethylene) resins - Notched, constant ligament-stress (NCLS) method
塑料管道和配件的试验方法 方法25:聚乙烯（PE）树脂缓慢裂纹扩展的测定.缺口恒定韧带应力（NCLS）法

2005-09-30