现行

AS/NZS 4257.8-1994

Plastic roof and wall cladding materials - Methods of test, Method 8: Determination of residual styrene
塑料屋顶和墙面覆层材料.试验方法 方法8:残留苯乙烯的测定

1994-12-05

现行

AS/NZS 4257.6-1994

Plastic roof and wall cladding materials - Methods of test, Method 6: Determination of impact resistance
塑料屋顶和墙面覆层材料.试验方法 方法6:耐冲击性的测定

1994-12-05

现行

AS 4256.1-2006

Plastic roof and wall cladding materials, Part 1: General requirements
塑料屋顶和墙面覆层材料第1部分:一般要求

2006-06-30

现行

AS/NZS 4257.5-1994

Plastic roof and wall cladding materials - Methods of test, Method 5: Determination of glass fibre content
塑料屋顶和墙面覆层材料.试验方法 方法5:玻璃纤维含量的测定

1994-12-05

现行

AS/NZS 4257.4-1994

Plastic roof and wall cladding materials - Methods of test, Method 4: Determination of diffuse light transmission
塑料屋顶和墙面覆层材料.试验方法 方法4:漫射光透射的测定

1994-12-05

现行

AS/NZS 4257.2-1994

Plastic roof and wall cladding materials - Methods of test, Method 2: Determination of dimensional stability at 60°C
塑料屋顶和墙面覆层材料.试验方法 方法2:60°C下尺寸稳定性的测定

1994-12-05

现行

AS/NZS 4257.3-1994

Plastic roof and wall cladding materials - Methods of test, Method 3: Determination of mass per unit area of sheet
塑料屋顶和墙面覆层材料.试验方法 方法3:薄板单位面积质量的测定

1994-12-05

现行

AS 4040.1-1992

Methods of testing sheet roof and wall cladding, Method 1: Resistance to concentrated loads
屋顶和墙面覆层的试验方法 方法1:耐集中荷载

1992-07-20

现行

BS EN 491-2011

Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods
屋顶覆盖层和墙面覆层用混凝土屋面瓦和配件 测试方法

2012-01-31

现行

UNE-EN 491-2005

Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods
屋顶覆盖层和墙面覆盖层用混凝土屋顶瓦和配件.试验方法

2005-07-13

现行

AS/NZS 4040.5-1996

Methods of testing sheet roof and wall cladding, Method 5: Resistance to impact (sandbag) for wall boards
屋顶和墙面覆层的试验方法 方法5:墙板的抗冲击性（沙袋）

1996-03-05

现行

AS/NZS 4257.7-1994

Plastic roof and wall cladding materials - Methods of test, Method 7: Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure
塑料屋顶和墙面覆层材料.试验方法 方法7:紫外线照射后色牢度 透光性和耐冲击性的测定

1994-12-05

现行

AS 4040.0-1992

Methods of testing sheet roof and wall cladding, Part 0: Introduction, list of methods and general requirements
屋顶和墙面覆层的试验方法 第0部分:简介、方法列表和一般要求

1992-07-20

现行

AS 4040.3-2018

Methods of testing sheet roof and wall cladding, Method 3: Resistance to wind pressures for cyclone regions
屋顶和墙面覆层的试验方法 方法3:旋风区域的抗风压性

2018-02-14

现行

AS 4040.2-1992

Methods of testing sheet roof and wall cladding, Method 2: Resistance to wind pressures for non-cyclone regions
屋顶和墙面覆层的试验方法 方法2:非气旋区域的抗风压性

1992-07-20

现行

BS EN 1013-2012+A1-2014

Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings. Requirements and test methods
内外屋顶、墙壁和天花板用透光单层压型塑料板 要求和试验方法

2015-09-30

现行

UNE-EN 1013-1-1998

LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING. PART 1: GENERAL REQUIREMENTS AND TEST METHODS.
单层屋顶用透光压型塑料板 第1部分:一般要求和试验方法

1998-10-29

现行

BS 12/30276314 DC

NA to BS EN 1013. Light transmitting single skin profiled plastic sheets for internal and external roofs, walls and ceilings. Requirements and test methods
不适用于BS EN 1013 用于内外屋顶、墙壁和天花板的透光单层异型塑料板 要求和试验方法

2012-12-05

现行

KS C IEC 61234-1(2017 Confirm)

전기 절연 재료의 수화 안정성 시험 방법－제1부：플라스틱 필름
电绝缘材料水解稳定性试验方法第1部分:塑料薄膜

2002-03-06

现行

IEC 61234-1-1994

Method of test for the hydrolytic stability of electrical insulating materials - Part 1: Plastic films
电绝缘材料水解稳定性试验方法第1部分:塑料薄膜

1994-03-11