现行

AS 4040.1-1992

Methods of testing sheet roof and wall cladding, Method 1: Resistance to concentrated loads
屋顶和墙面覆层的试验方法 方法1:耐集中荷载

1992-07-20

现行

AS 4040.3-2018

Methods of testing sheet roof and wall cladding, Method 3: Resistance to wind pressures for cyclone regions
屋顶和墙面覆层的试验方法 方法3:旋风区域的抗风压性

2018-02-14

现行

AS 4040.2-1992

Methods of testing sheet roof and wall cladding, Method 2: Resistance to wind pressures for non-cyclone regions
屋顶和墙面覆层的试验方法 方法2:非气旋区域的抗风压性

1992-07-20

现行

AS/NZS 4257.6-1994

Plastic roof and wall cladding materials - Methods of test, Method 6: Determination of impact resistance
塑料屋顶和墙面覆层材料.试验方法 方法6:耐冲击性的测定

1994-12-05

现行

AS 4040.0-1992

Methods of testing sheet roof and wall cladding, Part 0: Introduction, list of methods and general requirements
屋顶和墙面覆层的试验方法 第0部分:简介、方法列表和一般要求

1992-07-20

现行

AS/NZS 4257.5-1994

Plastic roof and wall cladding materials - Methods of test, Method 5: Determination of glass fibre content
塑料屋顶和墙面覆层材料.试验方法 方法5:玻璃纤维含量的测定

1994-12-05

现行

BS EN 491-2011

Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods
屋顶覆盖层和墙面覆层用混凝土屋面瓦和配件 测试方法

2012-01-31

现行

UNE-EN 491-2005

Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods
屋顶覆盖层和墙面覆盖层用混凝土屋顶瓦和配件.试验方法

2005-07-13

现行

AS/NZS 4257.3-1994

Plastic roof and wall cladding materials - Methods of test, Method 3: Determination of mass per unit area of sheet
塑料屋顶和墙面覆层材料.试验方法 方法3:薄板单位面积质量的测定

1994-12-05

现行

AS/NZS 4257.8-1994

Plastic roof and wall cladding materials - Methods of test, Method 8: Determination of residual styrene
塑料屋顶和墙面覆层材料.试验方法 方法8:残留苯乙烯的测定

1994-12-05

现行

AS/NZS 4257.1-1994

Plastic roof and wall cladding materials - Methods of test, Method 1: Determination of dimensional properties
塑料屋顶和墙面覆层材料.试验方法 方法1:尺寸特性的测定

1994-12-05

现行

AS/NZS 4257.4-1994

Plastic roof and wall cladding materials - Methods of test, Method 4: Determination of diffuse light transmission
塑料屋顶和墙面覆层材料.试验方法 方法4:漫射光透射的测定

1994-12-05

现行

AS/NZS 4257.2-1994

Plastic roof and wall cladding materials - Methods of test, Method 2: Determination of dimensional stability at 60°C
塑料屋顶和墙面覆层材料.试验方法 方法2:60°C下尺寸稳定性的测定

1994-12-05

现行

AS/NZS 4257.7-1994

Plastic roof and wall cladding materials - Methods of test, Method 7: Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure
塑料屋顶和墙面覆层材料.试验方法 方法7:紫外线照射后色牢度 透光性和耐冲击性的测定

1994-12-05

现行

ASTM D4932/D4932M-89(2024)

Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles
屋顶和防水板、屋面和瓦的紧固件断裂和抗撕裂性的标准试验方法

2024-11-01

现行

ASTM E695-22

Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
测量墙壁、地板和屋顶结构对冲击载荷的相对阻力的标准试验方法

2022-10-01

现行

BS EN 1013-2012+A1-2014

Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings. Requirements and test methods
内外屋顶、墙壁和天花板用透光单层压型塑料板 要求和试验方法

2015-09-30

现行

BS EN 16240-2013

Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
屋顶、墙壁和天花板内外用透光平板固体聚碳酸酯（PC）板材 要求和试验方法

2013-12-31

现行

BS EN 16153-2013+A1-2015

Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
屋顶、墙壁和天花板内外用透光多层聚碳酸酯（PC）平板 要求和试验方法

2015-05-31

现行

JIS C 2550-5-2020

Test methods for electrical steel strip and sheet -- Part 5: Methods of measurement of resistivity, density and stacking factor of electrical steel strip and sheet
电工钢带和电工钢片试验方法第5部分:电工钢带和电工钢片电阻率、密度和叠加系数的测量方法

2020-01-01