现行

AS/NZS 4257.8-1994

Plastic roof and wall cladding materials - Methods of test, Method 8: Determination of residual styrene
塑料屋顶和墙面覆层材料.试验方法 方法8:残留苯乙烯的测定

1994-12-05

现行

AS/NZS 4257.6-1994

Plastic roof and wall cladding materials - Methods of test, Method 6: Determination of impact resistance
塑料屋顶和墙面覆层材料.试验方法 方法6:耐冲击性的测定

1994-12-05

现行

AS/NZS 4257.1-1994

Plastic roof and wall cladding materials - Methods of test, Method 1: Determination of dimensional properties
塑料屋顶和墙面覆层材料.试验方法 方法1:尺寸特性的测定

1994-12-05

现行

AS/NZS 4257.5-1994

Plastic roof and wall cladding materials - Methods of test, Method 5: Determination of glass fibre content
塑料屋顶和墙面覆层材料.试验方法 方法5:玻璃纤维含量的测定

1994-12-05

现行

AS/NZS 4257.4-1994

Plastic roof and wall cladding materials - Methods of test, Method 4: Determination of diffuse light transmission
塑料屋顶和墙面覆层材料.试验方法 方法4:漫射光透射的测定

1994-12-05

现行

AS/NZS 4257.2-1994

Plastic roof and wall cladding materials - Methods of test, Method 2: Determination of dimensional stability at 60°C
塑料屋顶和墙面覆层材料.试验方法 方法2:60°C下尺寸稳定性的测定

1994-12-05

现行

AS 4256.3-2006

Plastic roof and wall cladding materials, Part 3: Glass fibre reinforced polyester (GRP)
塑料屋顶和墙面覆层材料第3部分:玻璃纤维增强聚酯（GRP）

2006-06-30

现行

BS EN 491-2011

Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods
屋顶覆盖层和墙面覆层用混凝土屋面瓦和配件 测试方法

2012-01-31

现行

UNE-EN 491-2005

Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods
屋顶覆盖层和墙面覆盖层用混凝土屋顶瓦和配件.试验方法

2005-07-13

现行

AS 4040.3-2018

Methods of testing sheet roof and wall cladding, Method 3: Resistance to wind pressures for cyclone regions
屋顶和墙面覆层的试验方法 方法3:旋风区域的抗风压性

2018-02-14

现行

AS/NZS 4040.5-1996

Methods of testing sheet roof and wall cladding, Method 5: Resistance to impact (sandbag) for wall boards
屋顶和墙面覆层的试验方法 方法5:墙板的抗冲击性（沙袋）

1996-03-05

现行

AS 4040.1-1992

Methods of testing sheet roof and wall cladding, Method 1: Resistance to concentrated loads
屋顶和墙面覆层的试验方法 方法1:耐集中荷载

1992-07-20

现行

AS/NZS 4257.7-1994

Plastic roof and wall cladding materials - Methods of test, Method 7: Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure
塑料屋顶和墙面覆层材料.试验方法 方法7:紫外线照射后色牢度 透光性和耐冲击性的测定

1994-12-05

现行

AS 4040.0-1992

Methods of testing sheet roof and wall cladding, Part 0: Introduction, list of methods and general requirements
屋顶和墙面覆层的试验方法 第0部分:简介、方法列表和一般要求

1992-07-20

现行

AS 4040.2-1992

Methods of testing sheet roof and wall cladding, Method 2: Resistance to wind pressures for non-cyclone regions
屋顶和墙面覆层的试验方法 方法2:非气旋区域的抗风压性

1992-07-20

现行

BS EN 1013-2012+A1-2014

Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings. Requirements and test methods
内外屋顶、墙壁和天花板用透光单层压型塑料板 要求和试验方法

2015-09-30

现行

AS 3558.3-1999

Methods of testing plastics and composite materials sanitary plumbing fixtures, Method 3: Determination of colour fastness
塑料和复合材料卫生管道固定装置的试验方法 方法3:色牢度的测定

1999-10-05

现行

UNE 53985-3-2004

Plastics. Test method for polyurethane raw materials. Polyols. Part 3: Determination of basicity.
塑料 聚氨酯原材料的试验方法 多元醇 第3部分:碱度的测定

2004-03-18

现行

BS 12/30276314 DC

NA to BS EN 1013. Light transmitting single skin profiled plastic sheets for internal and external roofs, walls and ceilings. Requirements and test methods
不适用于BS EN 1013 用于内外屋顶、墙壁和天花板的透光单层异型塑料板 要求和试验方法

2012-12-05

现行

DIN 4102-24

Fire behaviour of building materials and building components - Part 24: Assessment of the reaction to fire behaviour of external wall claddings using the base fire test method for façades
建筑材料和建筑构件的防火性能.第24部分:用外墙基本防火试验方法评估外墙覆层的防火性能

2022-12-01