现行

GOST 16925-1993

Метчики. Допуски на изготовление резьбовой части
水龙头螺纹部分的制造公差

1993-10-21

现行

JB/T 8824.2-2012

统一螺纹刀具 第2部分：丝锥螺纹公差
Tool for unified threads - Part 2:Manufacturing tolerances on the threaded portion of taps

2012-05-24

现行

DIN 802-6

Tolerances on the threaded portion of taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts according to DIN 8140 for ISO metric coarse and fine pitch threads; Manufacturing tolerances on the threaded portion
丝锥螺纹部分公差的制造.第6部分:DIN 8140中ISO米制粗牙和细牙螺纹用钢丝螺纹嵌件螺纹孔（EG）用磨制丝锥

2003-07-01

现行

ISO 2857-1973

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距用磨光丝锥——螺纹部分的制造公差

1973-12-01

现行

UNE 16605-1991

GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES. MANUFACTURING TOLERANCES ON THE THREADED PORTION.
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹的磨光丝锥 螺纹部分的制造公差

1991-01-10

现行

ISO 2857-1973/Amd 1-1984

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 1
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹用磨光丝锥.螺纹部分的制造公差.修改件1

1984-07-01

现行

ISO 2857-1973/Amd 2-1986

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion — Amendment 2
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹用磨光丝锥.螺纹部分的制造公差.修改件2

1986-09-25

现行

ISO 5969-1979

Ground thread taps for pipe threads G series and Rp series — Tolerances on the threaded portion
G系列和Rp系列管螺纹用地螺纹丝锥——螺纹部分的公差

1979-10-01

现行

GB/T 20334-2006

G系列和Rp系列管螺纹磨牙丝锥的螺纹尺寸公差
Ground thread taps for pipe threads G series and Rp series - Tolerances on the threaded portion

2006-07-20

现行

BS 949-2-1992

Screwing taps-Specification for unified ground thread taps. Manufacturing tolerances
旋塞

1992-12-15

现行

BS 949-4-1990

Screwing taps-Specification for metric ground thread taps: manufacturing tolerances
旋塞

1990-06-29

现行

GOST 7250-1960

Метчики для дюймовой резьбы. Допуски на резьбу
丝锥为英寸螺纹 螺纹公差

现行

GOST 11188-1982

Метчики для метрической резьбы с натягами. Допуски на резьбу
螺纹螺纹用于公制螺纹 螺纹公差

现行

GOST 19831-1974

Метчики для трапецеидальной резьбы. Допуски на резьбу
水龙头死梯梯形螺纹 螺纹公差

现行

GOST 18843-1973

Метчики бесстружечные. Допуски на резьбу
非从属的水龙头 螺纹公差

现行

GOST 19090-1993

Метчики для трубной цилиндрической резьбы. Допуски
管圆柱螺纹丝锥 公差

1993-10-21

现行

DIN EN 22857

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. AMD 1:1984 and AMD 2:1986); german version EN 22857:1989
公差为4H至8H和4G至6G粗牙距和细牙距的ISO公制螺纹用磨光丝锥；螺纹部分的制造公差（ISO 2857-1973 包括AMD 1-1984和AMD 2-1986）；德文版EN 22857:1989

1990-07-01

现行

DIN 8140-2

Wire thread inserts for ISO metric screw threads - Part 2: Tapped holes for thread inserts, thread tolerances
ISO米制螺纹用钢丝螺纹嵌件.第2部分:螺纹嵌件用螺纹孔.螺纹公差

2005-08-01

现行

BS ISO 965-4-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO通用公制螺纹 公差

2021-07-26

现行

ISO 965-4-2021

ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
Iso通用公制螺纹螺纹 - 公差 - 第4部分:热浸镀锌外螺纹的尺寸限制 与内螺纹螺纹配合 镀镍后具有公差位置H或G

2021-07-06