现行

BS 4506-1970

Specification for shaft ends
轴端规范

1970-01-19

现行

JIS B 0903-2001

Cylindrical shaft ends
圆柱轴端

2001-01-01

现行

GB/T 1569-2005

圆柱形轴伸
Cylindrical shaft ends

2005-05-16

现行

GB/T 1570-2005

圆锥形轴伸
conical shaft ends

2005-05-16

现行

GOST 12080-1966

Концы валов цилиндрические. Основные размеры, допускаемые крутящие моменты
轴的圆柱端

现行

SAE ARP676A

LEVER ENDS (INVOLUTE SERRATIONS) (Stabilized: Apr 2018)
杠杆端部（渐开线锯齿）（稳定:2018年4月）

2018-04-19

现行

ADS RS214

Gauging Systems for A|D|S Standard Propeller Shaft & Hub Serrations
A | D | S标准传动轴和轮毂锯齿的测量系统

1949-08-26

现行

SAE J501_201406

Shaft Ends (Stabilized: Jun 2014)
轴端（稳定:2014年6月）

2014-06-05

现行

SAE J755_201505

Marine Propeller-Shaft Ends and Hubs
船用螺旋桨轴端和轮毂

2015-05-12

现行

NAS 352

Shaft End - Pilot's Control Wheel
轴端-飞行员控制轮

1961-09-30

现行

GB/T 891-1986

螺钉紧固轴端挡圈
Lock rings at the end of shaft with screw

1986-07-02

现行

GB/T 892-1986

螺栓紧固轴端挡圈
Lock rings at the end of shaft with bolt

1986-07-02

现行

NAS 1732 Rev.2

Nut, Blind, Serrated Head, Self-Locking, Closed End, 450F
闭口自锁锯齿头盲螺母 450F

2012-02-29

现行

MIL MS51551 Notice 1-Inactivation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
螺柱 锁定在环内 锯齿状 无螺纹螺母端 增加螺柱端长度

1998-01-19

现行

MIL MS51551

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
锁紧螺柱-环形锁紧 锯齿形 UNJF螺纹螺母端 增加螺柱端长度

1987-05-12

现行

MIL MS51551 Notice 2-Validation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
螺柱 锁定在环内 锯齿状 无螺纹螺母端 增加螺柱端长度

2019-06-11

现行

DIN 1449

Conical shaft ends with internal threade - Dimensions
带内螺纹的锥形轴端；尺寸

1970-01-01

现行

DIN 42020

Shaft ends with tolerance ring for small motors
小型电机用带公差环的轴端

1982-05-01

现行

DIN 1448-1

Conical Shaft Ends with External Thread; Dimensions
带外螺纹的锥形轴端；尺寸

1970-01-01

现行

DIN 748-1

Cylindrical Shaft Ends; Dimensions, Nominal Transmissible Torques
圆柱轴端；尺寸、标称传递扭矩

1970-01-01