现行

GB/T 892-1986

螺栓紧固轴端挡圈
Lock rings at the end of shaft with bolt

1986-07-02

现行

GB/T 884-1986

螺钉锁紧挡圈
Lock ring with screw

1986-07-02

现行

DIN 42020

Shaft ends with tolerance ring for small motors
小型电机用带公差环的轴端

1982-05-01

现行

GB/T 885-1986

带锁圈的螺钉锁紧挡圈
Lock rings with screw and circlip

1986-07-02

现行

JB/T 3162-2011

滚珠丝杠副 丝杠轴端型式尺寸
Ball screw assembly - Dimension of shaft-end type screw

2011-05-18

现行

GB/T 39961-2021

滚珠丝杠副 支承结构型式尺寸
Ball screw assembly—Dimension of shaft-end type screw

2021-03-09

现行

ADS RS741

Shaft & Groove Dimensions for Ring, Retaining (Friction Locking)
挡圈（摩擦锁紧）的轴和槽尺寸

1981-05-01

现行

MIL MS51991D Amendment 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated
插入件 螺纹锁定 环锁定 锯齿形

2015-08-20

现行

MIL MS51991D

Insert, Screw Thread-Locked in, Ring Locked, Serrated
镶块 螺纹锁紧 环锁紧 锯齿形

2012-11-14

现行

MIL MS51991D Notice 1-Validation 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated
插入件 螺纹锁定 环锁定 锯齿形

2020-05-26

现行

MIL MS51551 Notice 1-Inactivation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
螺柱 锁定在环内 锯齿状 无螺纹螺母端 增加螺柱端长度

1998-01-19

现行

MIL MS51551

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
锁紧螺柱-环形锁紧 锯齿形 UNJF螺纹螺母端 增加螺柱端长度

1987-05-12

现行

MIL MS51551 Notice 2-Validation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
螺柱 锁定在环内 锯齿状 无螺纹螺母端 增加螺柱端长度

2019-06-11

现行

MIL MS51993B Notice 1-Validation 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入 螺纹锁定 锁定 锯齿 高强度

2019-02-15

现行

MIL MS51991C Amendment 1

INSERT, SCREW THREAD - LOCKED IN, RING LOCKED, SERRATED (SUPERSEDING MS51991B)
锯齿形锁紧环内螺纹嵌件（取代MS51991B）

1997-08-06

现行

MIL MS51993B

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入件 螺纹锁定 环锁定 锯齿状 高强度

2012-11-01

现行

MIL MS51993B Amendment 1(amendment incorporated)

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入件 螺纹锁定 环锁定 锯齿状 高强度

2014-02-04

现行

MIL MIL-DTL-45910D

Insert, Screw Thread-Locked in and Ring Locked, Serrated General Specification for
螺纹锁紧和环锁紧锯齿嵌件通用规范

2015-06-18

现行

MIL MIL-DTL-45910D Notice 1-Validation 1

Insert, Screw Thread-Locked in and Ring Locked, Serrated General Specification for
带锯齿的螺纹锁紧和环锁紧嵌件通用规范

2020-06-25

现行

MIL MS51998 Notice 4-Validation 4

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
插入件 螺纹锁定 环锁定 锯齿状 设计和使用限制

2019-07-24