现行

GB/T 885-1986

带锁圈的螺钉锁紧挡圈
Lock rings with screw and circlip

1986-07-02

现行

MIL MS51991D Amendment 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated
插入件 螺纹锁定 环锁定 锯齿形

2015-08-20

现行

MIL MS51991D

Insert, Screw Thread-Locked in, Ring Locked, Serrated
镶块 螺纹锁紧 环锁紧 锯齿形

2012-11-14

现行

MIL MS51991D Notice 1-Validation 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated
插入件 螺纹锁定 环锁定 锯齿形

2020-05-26

现行

GB/T 891-1986

螺钉紧固轴端挡圈
Lock rings at the end of shaft with screw

1986-07-02

现行

MIL MS51993B Notice 1-Validation 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入 螺纹锁定 锁定 锯齿 高强度

2019-02-15

现行

MIL MS51991C Amendment 1

INSERT, SCREW THREAD - LOCKED IN, RING LOCKED, SERRATED (SUPERSEDING MS51991B)
锯齿形锁紧环内螺纹嵌件（取代MS51991B）

1997-08-06

现行

MIL MS51993B

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入件 螺纹锁定 环锁定 锯齿状 高强度

2012-11-01

现行

MIL MS51993B Amendment 1(amendment incorporated)

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入件 螺纹锁定 环锁定 锯齿状 高强度

2014-02-04

现行

MIL MIL-DTL-45910D

Insert, Screw Thread-Locked in and Ring Locked, Serrated General Specification for
螺纹锁紧和环锁紧锯齿嵌件通用规范

2015-06-18

现行

MIL MIL-DTL-45910D Notice 1-Validation 1

Insert, Screw Thread-Locked in and Ring Locked, Serrated General Specification for
带锯齿的螺纹锁紧和环锁紧嵌件通用规范

2020-06-25

现行

MIL MS51998 Notice 4-Validation 4

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
插入件 螺纹锁定 环锁定 锯齿状 设计和使用限制

2019-07-24

现行

MIL MS51998 Notice 1-Validation 1

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
插入件 螺纹锁定 环锁定 锯齿状 设计和使用限制

1988-05-10

现行

MIL MS51998 Notice 2-Validation 2

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
插入件 螺纹锁定 环锁定 锯齿状 设计和使用限制

2001-09-14

现行

MIL MS51998

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
嵌件 螺纹锁紧 环锁紧 锯齿形 设计和使用限制

1967-12-12

现行

MIL MS51498 Amendment 1

INSERT,SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
插入件 螺纹锁紧 环锁紧 锯齿状 高强度 超大更换件

1997-08-06

现行

MIL MS51993A Amendment 1

INSERT, SCREW THREAD - LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH (SUPERSEDING MS51993)
螺纹锁紧、环锁紧、锯齿状、高强度插入件（取代MS51993）

1997-08-06

现行

MIL MS51498 Notice 1-Validation 1

INSERT,SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
插入件 螺纹锁紧 环锁紧 锯齿状 高强度 超大更换件

2002-12-12

现行

MIL MS51498 Notice 3-Cancellation 1

INSERT,SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
插入件 螺纹锁紧 环锁紧 锯齿状 高强度 超大更换件

2019-03-18

现行

MIL MS51498

INSERT,SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
插入件 螺纹锁紧 环锁紧 锯齿形 高强度 超大替换件

1985-03-11