本文件规定了紫外线激光打印护套、镀银铜导体、， 船用交联乙烯-四氟乙烯共聚物（XLETFE）系列电缆 在-65°C和150°C之间运行的飞机电气系统 海平面上的电压不超过600 V rms。这种绝缘系统已用于航空航天 使用115 V（相到中性点）400 Hz ac和28 Vdc的应用。验证电缆的适用性 用于其他电气系统是用户的责任。 这些护套电缆适用于机身使用，当护套 目前剥去护套后，芯线可能需要额外保护。万一发生冲突 在本文件和其他参考文件之间，应采用本标准的要求 优先交叉引用:EN 4612-002EN 4611-005EN 2084EN 3475（所有部分）EN 2235EN 9133购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document specifies the characteristics of UV laser printable jacket, silver plated copper conductor, electrical cables crosslinked ethylene tetra fluoro ethylene co-polymer (XLETFE) family for use in the onboard electrical systems of aircraft operating at temperatures between - 65 °C and 150 °C, operating at voltages not exceeding 600 V rms at sea level. This insulation system has been used in aerospace applications using 115 V (phase-to-neutral) 400 Hz ac and 28 Vdc. Verification of the suitability of cables for use in other electrical systems is the responsibility of the user. These jacketed cables are suitable for airframe use without additional protection when the jacket is present. When the jacket is stripped back the cores may need additional protection. In case of conflict between this document and other referenced documents the requirements of this standard shall take precedence.Cross References:EN 4612-002EN 4611-005EN 2084EN 3475 (all parts)EN 2235EN 9133All current amendments available at time of purchase are included with the purchase of this document.