BS 2TA 38:2009-钛铝钼锡硅碳合金机械加工用棒材规范（抗拉强度1250-1420MPa）（极限截面25mm）-国家数字标准馆

现行 BS 2TA 38:2009

到馆阅读

收藏跟踪

购买正版

Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon- carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm) 钛铝钼锡硅碳合金机械加工用棒材规范（抗拉强度1250-1420MPa）（极限截面25mm）

发布日期： 2009-11-30

交叉引用:BS TA 100BS TA 39BS TA 40BS TA 41BS TA 42EN 4500-1EN 4500-4购买时可用的所有现行修订均包含在本文件的购买中。

Cross References:BS TA 100BS TA 39BS TA 40BS TA 41BS TA 42EN 4500-1EN 4500-4All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 MPa) (limiting ruling section 25 mm)
钛铝钼锡硅合金机械加工用棒材和型材规范（抗拉强度1100-1280MPa）（极限划线截面25mm）

BS 09/30193169 DC

BS 2TA 38. Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1250-1420 MPa. Limiting ruling section 25 mm
BS 2TA 38 钛铝钼锡硅碳合金加工用棒材规范抗拉强度1250-1420兆帕限制截面25毫米

Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section over 25 mm up to and including 100 mm)
钛铝钼锡硅合金（抗拉强度1050-1220 MPa）机加工用棒材和型材规范（限制划线截面大于25 mm 小于等于100 mm）

Specification for bar for machining of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
钛-铝-钼-锡-硅-碳合金（抗拉强度1205-1375MPa）机加工用棒材规范（限制划线截面大于25mm 小于等于75mm）

Specification for bar and section for machining of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (Tensile strength 1000-1200 MPa) (Limiting ruling section over 100 mm up to and including 150 mm)
钛铝-钼锡硅碳合金（抗拉强度1000-1200 MPa）机加工用棒材和型材规范（超过100 mm至150 mm（含150 mm）的极限划线截面）

BS 09/30193181 DC

BS 2TA 46. Specification for bar and section for machining of titanium-aluminium-molybdenum-tin -silicon alloy. Tensile strength 1050-1220 MPa. Limiting ruling section over 25 mm up to and including 100 mm
BS 2TA 46 钛铝钼锡硅合金加工用棒材和型材规范抗拉强度1050-1220兆帕超过25 mm（小于等于100 mm）的限制截面

BS 09/30193179 DC

BS 2TA 45. Specification for bar and section for machining of titanium-aluminium- molybdenumtin-silicon alloy. Tensile strength 1100-1280 MPa. Limiting ruling section 25 mm
BS 2TA 45 钛铝钼锡硅合金加工用棒材和型材规范抗拉强度1100-1280兆帕限制截面25毫米

Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
镍钴铬钼钛铝耐热合金坯料、棒材、锻件和零件（镍基、钴20、铬20、钼5.9、钛2.1、铝0.5）规范

Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4)
镍铬钴铝钼钛耐热合金坯料、棒材、锻件和零件（镍基、Cr15、Co14.2、Al5、Mo4、Ti4）规范

Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti 1.2)
镍钴铬钼铝钛耐热合金坯料、棒材、锻件和零件（镍基、钴20、铬14.8、钼5、铝4.8、钛1.2）规范

Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
镍铁铬钼铝钛耐热合金坯料、棒材、锻件和零件规范（镍/钴43.5、铬16.5、钼3.3、铝1.2、钛1.2、铁余物）

BS 09/30199929 DC

BS 2HR 3. Specification for nickel-cobalt-chromium-molybdenum- aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti 1.2)
BS 2HR 3 镍钴铬钼铝钛耐热合金坯料、棒材、锻件和零件（镍基、钴20、铬14.8、钼5、铝4.8、钛1.2）规范

BS 09/30199931 DC

BS 2HR 4. Specification for nickel-chromium-cobalt-aluminium-molybdenum- titanium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4)
BS 2HR 4 镍-铬-钴-铝-钼-钛耐热合金坯料、棒材、锻件和零件（镍基、Cr 15、Co 14.2、Al 5、Mo 4、Ti 4）规范

BS 09/30199937 DC

BS 2HR 10. Specification for nickel-cobalt-chromium-molybdenum- titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
英国标准2小时10分镍钴铬钼钛铝耐热合金坯料、棒材、锻件和零件（镍基、钴20、铬20、钼5.9、钛2.1、铝0.5）规范

BS 09/30201787 DC

BS 2HR 55. Specification for nickel-iron-chromium-molybdenum-aluminium- titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3. 3, Al 1.2, Ti 1.2, Fe remainder)
英国标准2小时55分镍铁铬钼铝钛耐热合金坯料、棒材、锻件和零件（镍/钴43.5、铬16.5、钼3.3、铝1.2、钛1.2、铁余物）规范

BS 09/30193187 DC

BS 2TA 49. Specification for bar and section for machining of titanium-aluminium-molybdenumtin- silicon alloy. Tensile strength 1000-1200 MPa. Limiting ruling section over 100 mm up to and including 150 mm
BS 2TA 49 钛铝钼锡硅合金加工用棒材和型材规范抗拉强度1000-1200兆帕超过100 mm（小于等于150 mm）的限制截面

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统