BS 2TA 45:2009-钛铝钼锡硅合金机械加工用棒材和型材规范（抗拉强度1100-1280MPa）（极限划线截面25mm）-国家数字标准馆

现行 BS 2TA 45:2009

到馆阅读

收藏跟踪

购买正版

Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 MPa) (limiting ruling section 25 mm) 钛铝钼锡硅合金机械加工用棒材和型材规范（抗拉强度1100-1280MPa）（极限划线截面25mm）

发布日期： 2009-11-30

交叉引用:BS TA 100BS TA 46BS TA 47BS TA 48BS TA 49BS TA 50BS TA 51EN 4500-1EN 4500-4购买本文件时可获得的所有现行修订均包含在购买本文件中。

Cross References:BS TA 100BS TA 46BS TA 47BS TA 48BS TA 49BS TA 50BS TA 51EN 4500-1EN 4500-4All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS EN 4800-002-2010

Aerospace series. Titanium and titanium alloys. Technical specification-Bar and section
航空航天系列钛和钛合金技术规格棒材和型材

Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 MPa)
商用纯钛（抗拉强度540-740 MPa）机加工用棒材和型材规范

BS 09/30193179 DC

BS 2TA 45. Specification for bar and section for machining of titanium-aluminium- molybdenumtin-silicon alloy. Tensile strength 1100-1280 MPa. Limiting ruling section 25 mm
BS 2TA 45 钛铝钼锡硅合金加工用棒材和型材规范抗拉强度1100-1280兆帕限制截面25毫米

Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon- carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)
钛铝钼锡硅碳合金机械加工用棒材规范（抗拉强度1250-1420MPa）（极限截面25mm）

BS EN 4400-3-2019

Aerospace series. Aluminium and aluminium- and magnesium- alloys. Technical specification-Aluminium and aluminium alloy bar and section
航空航天系列铝和铝及镁合金技术规格铝及铝合金棒材和型材

Specification for bar and section for machining of commercially pure titanium (tensile strength 390-540 N/mm^2)
商用纯钛机械加工用棒材和型材规范（抗拉强度390-540 N/mm^2）

BS 01/710896 DC

EN 4800-2. Aerospace series. Titanium and titanium alloys. Technical specification. Bar and section
EN 4800-2 航空航天系列钛和钛合金技术规格棒材和型材

ASD-STAN prEN 4400-3

Aluminium and aluminium alloy wrought products - Technical Specification - Part 3: Bar and section
铝和铝合金锻造产品.技术规范.第3部分:棒材和型材

Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section over 25 mm up to and including 100 mm)
钛铝钼锡硅合金（抗拉强度1050-1220 MPa）机加工用棒材和型材规范（限制划线截面大于25 mm 小于等于100 mm）

Specification for bar and section for machining of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (Tensile strength 1000-1200 MPa) (Limiting ruling section over 100 mm up to and including 150 mm)
钛铝-钼锡硅碳合金（抗拉强度1000-1200 MPa）机加工用棒材和型材规范（超过100 mm至150 mm（含150 mm）的极限划线截面）

Specification for forging stock, bars, extruded sections and forgings of 99% aluminium
99%铝的锻坯、棒材、挤压型材和锻件规范

BS 09/30193169 DC

BS 2TA 38. Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1250-1420 MPa. Limiting ruling section 25 mm
BS 2TA 38 钛铝钼锡硅碳合金加工用棒材规范抗拉强度1250-1420兆帕限制截面25毫米

BS 09/30193187 DC

BS 2TA 49. Specification for bar and section for machining of titanium-aluminium-molybdenumtin- silicon alloy. Tensile strength 1000-1200 MPa. Limiting ruling section over 100 mm up to and including 150 mm
BS 2TA 49 钛铝钼锡硅合金加工用棒材和型材规范抗拉强度1000-1200兆帕超过100 mm（小于等于150 mm）的限制截面

Specification for bar and section for machining of titanium-copper alloy (tensile strength 540-770 N/mm²)
钛铜合金机械加工用棒材和型材规范（抗拉强度540-770 N/mm^2）

UNE-EN 2070-3-1993

AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOYS WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 3: BAR AND SECTION.
航空航天系列铝及铝合金锻造制品技术规格第3部分:钢筋和截面

BS 09/30193181 DC

BS 2TA 46. Specification for bar and section for machining of titanium-aluminium-molybdenum-tin -silicon alloy. Tensile strength 1050-1220 MPa. Limiting ruling section over 25 mm up to and including 100 mm
BS 2TA 46 钛铝钼锡硅合金加工用棒材和型材规范抗拉强度1050-1220兆帕超过25 mm（小于等于100 mm）的限制截面

Specification for bar and section for machining of titanium-copper alloy (tensile strength 650-880 N/mm²) (limiting ruling section 75 mm)
钛铜合金机械加工用棒材和型材规范（抗拉强度650-880 N/mm^2）（极限截面75 mm）

Specification for bar for machining of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
钛-铝-钼-锡-硅-碳合金（抗拉强度1205-1375MPa）机加工用棒材规范（限制划线截面大于25mm 小于等于75mm）

Specification for forging stock, bars, extruded sections and forgings of aluminium-2¼% magnesium alloy
铝-2 3/16%镁合金锻坯、棒材、挤压型材和锻件规范

Specification for copper-aluminium-nickel-iron alloy rods, bars, sections, forging stock and forgings
铜铝镍铁合金棒材、棒材、型材、锻坯和锻件规范

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统