本规范规定了集成电路或微电路的一般性能要求以及采购时应满足的质量和可靠性保证要求。本规范旨在使设备制造商能够灵活地最大限度地实施最佳商业实践，同时仍能提供满足军事性能需求的产品。详细要求、微电路的特定特性以及对特定用途敏感的其他规定将在设备规范中规定。本文概述的质量保证要求适用于通过制造商的质量管理（QM）计划控制的生产线上构建的所有微电路，并已根据本文的要求通过资格认证机构（QA）的认证和资格认证。 本规范提供了包括RHA在内的多个级别的产品保证。此处的认证和资格部分概述了合格制造商名单（QML）上列出的制造商应满足的要求。在QML上列出技术流程后，制造商应不断满足或改进所有QML产品的认证和合格程序、QM程序、制造商审查系统、状态报告以及质量和可靠性保证要求的既定基线。制造商可提供解决本规范中所含要求的替代方法。这些替代方法将由资格鉴定活动批准。本规范要求制造商建立工艺流程基线。 如果有足够的质量和可靠性数据，制造商可以通过质量管理程序和制造商的审查系统修改、替换或删除测试。有关QML过程及其原理的更多信息，请参阅本文的6.5。冲突。

This specification establishes the general performance requirements for integrated circuits or microcircuits and the quality and reliability assurance requirements, which are to be met for their acquisition. The intent of this specification is to allow the device manufacturer the flexibility to implement best commercial practices to the maximum extent possible while still providing product that meets military performance needs. Detail requirements, specific characteristics of microcircuits, and other provisions which are sensitive to the particular use intended will be specified in the device specification. Quality assurance requirements outlined herein are for all microcircuits built on a manufacturing line which is controlled through a manufacturer's quality management (QM) program and has been certified and qualified by the Qualifying Activity (QA) in accordance with requirements herein. Several levels of product assurance including RHA are provided for in this specification. The certification and qualification sections found herein outline the requirements to be met by a manufacturer to be listed on a Qualified Manufacturer Listing (QML). After listing of a technology flow on a QML, the manufacturer is to continually meet or improve the established baseline of certified and qualified procedures, the QM program, the manufacturer's review system, the status reporting, and quality and reliability assurance requirements for all QML products. The manufacturer may present alternate methods of addressing the requirements contained in this specification. These alternate methods will be approved by the Qualifying Activity. This specification requires a manufacturer to establish a process flow baseline. If sufficient quality and reliability data is available, the manufacturer, through the QM program and the manufacturer's review system, may modify, substitute, or delete tests. Additional information on the QML process and its philosophy is available in 6.5 herein. Clas.