BS PD IEC/TS 61463:2016是一项技术规范，适用于交流电和交流电 最高电压高于52 kV（或谐振频率）的直流套管 放置在地震反应谱内），安装在变压器、其他设备或 建筑。对于最高电压小于或等于52 kV（或有谐振）的套管 位于地震反应谱之外的频率），由于其特性， 就施工实践和抗震施工而言，未使用抗震鉴定 遵守最新的实践。本文件介绍了可接受的抗震鉴定方法和要求 证明套管可以保持其机械性能、绝缘和承载电流 地震期间和之后。套管的抗震鉴定仅在要求时进行。交叉引用:IEC 60068-2-47IEC 60068-2-57IEC 60068- 3-3:1991IEC 60137IEC 61462IEC 62155IEC 62217ISO 2041IEC 60721-2-6IEC 60068-2-6:2007IEC 62271-207:2012IEE Std 693-2005JEAG 5003-2010IEC 62231购买本文件时提供的所有当前修订版均包括在内。

BS PD IEC/TS 61463:2016, which is a Technical Specification, is applicable to alternating current and direct current bushings for highest voltages above 52 kV (or with resonance frequencies placed inside the seismic response spectrum), mounted on transformers, other apparatus or buildings. For bushings with highest voltages less than or equal to 52 kV (or with resonance frequencies placed outside from the seismic response spectrum), due to their characteristics, seismic qualification is not used as far as construction practice and seismic construction practice comply with the state of the art.This document presents acceptable seismic qualification methods and requirements to demonstrate that a bushing can maintain its mechanical properties, insulate and carry current during and after an earthquake.The seismic qualification of a bushing is only performed upon request.Cross References:IEC 60068-2-47IEC 60068-2-57IEC 60068-3-3:1991IEC 60137IEC 61462IEC 62155IEC 62217ISO 2041IEC 60721-2-6IEC 60068-2-6:2007IEC 62271-207:2012IEEE Std 693-2005JEAG 5003-2010IEC 62231All current amendments available at time of purchase are included with the purchase of this document.