前言:这是音频/视频、信息和通信技术设备的统一CSA集团和UL标准——第1部分:安全要求。这是CSA C22的第三版。2第62368-1号和UL 62368-1第三版。此版本为CSA-C22。2第62368-1号文件取代了2014年12月1日出版的前一版。本版UL 62368-1取代2014年12月1日发布的前一版。本协调标准基于2018年10月发布的IEC出版物62368-1第三版《音频/视频、信息和通信技术设备第1部分:安全要求》。IEC出版物62368-1的版权归IEC所有。本标准的制定符合加拿大标准委员会对加拿大国家标准的要求。 CSA集团已将其作为加拿大国家标准发布。范围:IEC 62368的本部分适用于音频、视频、信息和通信技术领域内的电气和电子设备，以及额定电压不超过600 V的商用和办公机器的安全。本文件不包括设备的性能或功能特性要求。注1本文件范围内的设备示例见附录A。注2 600 V的额定电压被视为包括400/690 V的设备。本文件也适用于:拟并入本设备的部件和子组件。此类组件和子组件无需符合本文件的所有要求，前提是包含此类组件和子组件的完整设备确实符合要求； 用于供应本文件范围内其他设备的外部电源装置；拟与本文件范围内的设备一起使用的附件；安装在限制进入区域的大型设备。对于具有大型机械方面的设备，可能适用附加要求；用于热带地区的设备。本文件还包括拟安装在室外位置的音频/视频、信息和通信技术设备的要求。室外设备的要求也适用于适用于现场直接安装的室外外壳，并用于安装在室外位置的音频/视频、信息和通信技术设备。 本文件其他部分未涵盖的具体施工要求见附录Y。每个装置可能都有特殊要求。此外，本文件不包括保护室外设备免受直接雷击影响的要求。注3:有关该主题的信息，请参见IEC 62305-1。除非制造商另有规定，否则本文件假定最大高度为2000 m。IEC 62368-3中给出了通过常用通信电缆（如USB或以太网（PoE））提供直流电源的设备的附加要求。IEC 62368-3不适用于:使用专用连接器供电的设备；或使用专用协议选择电源的设备。 本文件规定了普通人、受训人员和技术人员的保障措施。其他要求可能适用于明确设计或计划供儿童使用或特别吸引儿童的设备。注4:在澳大利亚，由受训人员或熟练人员进行的工作可能需要监管机构的正式许可。注5:在德国，在许多情况下，只有在满足某些法律要求的情况下，一个人才能被视为受训人员或技术人员。本文件不适用于:带有非独立危险运动部件的设备，如机器人设备；注6:有关工业环境中机器人设备的相关要求，请参见IEC 60204- 1、IEC 60204-11、ISO 10218-1和ISO 10218-2。个人护理机器人，包括移动服务机器人、物理助理机器人和载人机器人；注7:有关个人护理机器人的要求，请参见ISO 13482。不属于设备组成部分的电源系统，如电动发电机组、备用电池系统和配电变压器。本文件不涉及:除例行试验外的制造过程；热分解或燃烧释放的气体的有害影响；处理过程；运输的影响（本文件规定的除外）；材料、部件或设备本身储存的影响；α粒子和β粒子等粒子辐射造成伤害的可能性； 辐射或对流热能导致热损伤的可能性；易燃液体造成伤害的可能性；在富氧或爆炸性环境中使用设备；接触第7条规定以外的化学品；静电放电事件；暴露于电磁场；环境方面；或功能安全要求，但与工作单元相关的要求除外。注8:有关电子安全相关系统（例如保护性电子电路）的具体功能和软件安全要求，请参见IEC 61508-1。

Preface:This is the harmonized CSA Group and UL standard forAudio/video, information and communication technology equipment – Part 1: Safety requirements. It is the third edition of CSA C22.2 No. 62368-1 and the third edition of UL 62368-1. This edition of CSA-C22.2 No. 62368-1 supersedes the previous edition published on December 1, 2014. This edition of UL 62368-1 supersedes the previous edition published on December 1, 2014.This harmonized standard is based on IEC Publication 62368-1, third edition,Audio/video, information and communication technology equipment – Part 1: Safety requirements, issued October 2018. IEC Publication 62368-1 is copyrighted by the IEC.This standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.Scope:This part of IEC 62368 is applicable to the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a RATED VOLTAGE not exceeding 600 V. This document does not include requirements for performance or functional characteristics of equipment.NOTE 1 Examples of equipment within the scope of this document are given in Annex A.NOTE 2 A RATED VOLTAGE of 600 V is considered to include equipment rated 400/690 V.This document is also applicable to:components and subassemblies intended for incorporation in this equipment. Such components and subassemblies need not comply with every requirement of this document, provided that the complete equipment, incorporating such components and subassemblies, does comply;external power supply units intended to supply other equipment within the scope of this document;accessories intended to be used with equipment within the scope of this document;large equipment installed in RESTRICTED ACCESS AREAS. For equipment having large machinery aspects, additional requirements may apply; andequipment to be used in tropical regions.This document also includes requirements for audio/video, information and communication technology equipment intended to be installed in an OUTDOOR LOCATION. The requirements for OUTDOOR EQUIPMENT also apply, where relevant, to OUTDOOR ENCLOSURES suitable for direct installation in the field and supplied for housing audio/video, information and communication technology equipment to be installed in an OUTDOOR LOCATION. See Annex Y for specific construction requirements not covered elsewhere in this document.Each installation may have particular requirements. In addition, requirements for protection of the OUTDOOR EQUIPMENT against the effects of direct lightning strikes are not covered by this document.NOTE 3 For information on this subject, see IEC 62305-1.This document assumes a maximum altitude of 2 000 m unless otherwise specified by the manufacturer.Additional requirements for equipment having the capability to supply DC power over commonly used communication cables, such as USB or Ethernet (PoE), are given in IEC 62368-3. IEC 62368-3 does not apply to:equipment supplying power using proprietary connectors; orequipment using a proprietary protocol for power selection.This document specifies SAFEGUARDS for ORDINARY PERSONS, INSTRUCTED PERSONS, and SKILLED PERSONS. Additional requirements may apply for equipment that is clearly designed or intended for use by children or specifically attractive to children.NOTE 4 In Australia, the work conducted by an INSTRUCTED PERSON or a SKILLED PERSON may require formal licensing from regulatory authorities.NOTE 5 In Germany, in many cases a person may only be regarded as an INSTRUCTED PERSON or a SKILLED PERSON if certain legal requirements are fulfilled.This document does not apply to:equipment with non-self-contained hazardous moving parts, such as robotic equipment; andNOTE 6 For requirements related to robotic equipment in an industrial environment, see IEC 60204-1, IEC 60204-11, ISO 10218-1 and ISO 10218-2.personal care robots, including mobile servant robots, physical assistant robots, and person carrier robots; andNOTE 7 For requirements related to personal care robots, see ISO 13482.power supply systems that are not an integral part of the equipment, such as motor-generator sets, BATTERY backup systems and distribution transformers.This document does not address:manufacturing processes except for ROUTINE TESTS;injurious effects of gases released by thermal decomposition or combustion;disposal processes;effects of transport (other than as specified in this document);effects of storage of materials, components, or the equipment itself;the likelihood of injury from particulate radiation such as alpha particles and beta particles;the likelihood of thermal injury due to radiated or convected thermal energy;the likelihood of injury due to flammable liquids;the use of the equipment in oxygen-enriched or EXPLOSIVE atmospheres;exposure to chemicals other than as specified in Clause 7;electrostatic discharge events;exposure to electromagnetic fields;environmental aspects; orrequirements for functional safety, except for those related to WORK CELLS.NOTE 8 For specific functional and software safety requirements of electronic safety-related systems (for example, protective electronic circuits), see IEC 61508-1.