本国际标准规定了交叉张力的试样尺寸和试验程序 在厚度为0.5mm的任何金属材料的重叠板上进行点焊和凸焊试验 至3 mm，其中焊缝的最大直径为7√t（其中t是板材厚度，单位为mm）。交叉拉伸试验的目的是确定试样能够承受的拉力。交叉引用:ISO 7500-1ISO 17677-1ISO 14329购买时可用的所有现行修订均包含在本文件的购买中。

This International Standard specifies specimen dimensions and a testing procedure for the cross tension testing of spot and projection welds in overlapping sheets in any metallic material of thickness 0,5 mm to 3 mm, where the welds have a maximum diameter of 7√t (where t is the sheet thickness in mm).The object of cross tension testing is to determine the tensile force that the test specimen can sustain.Cross References:ISO 7500-1ISO 17677-1ISO 14329All current amendments available at time of purchase are included with the purchase of this document.