首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM C882/C882M-23
到馆提醒
收藏跟踪
购买正版
Standard Test Method for Bond Strength of Bonding Systems Used With Concrete By Slant Shear 用倾斜剪切法测定混凝土粘结系统粘结强度的标准试验方法
发布日期: 2023-12-15
1.1 本试验方法涵盖了与硅酸盐水泥混凝土一起使用的粘结系统的粘结强度的测定。该试验方法包括将硬化混凝土粘结到硬化或新拌混凝土上。 1.2 以国际单位制或英寸磅单位表示的数值应单独视为标准。每个系统中规定的值不一定是完全相等的;因此,为了确保符合标准,每个系统应独立使用,并且不得将两个系统的值组合使用。 1.3 本标准的文本是指提供解释性材料的注释和脚注。这些注释和脚注(不包括表和图中的注释和脚注)不应被视为本标准的要求。 1.4 本标准并不旨在解决与其使用相关的所有安全问题(如有)。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 第节中给出了具体的危险说明 9 . ( 警告 --新鲜的水硬性胶结混合物具有腐蚀性,长时间暴露可能会对暴露的皮肤和组织造成化学灼伤。 2. ) 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 5.1 连接混凝土两个区域的粘结系统所产生的强度是其最重要的特性。
1.1 This test method covers the determination of the bond strength of bonding systems for use with portland-cement concrete. This test method covers bonding hardened concrete to hardened or freshly-mixed concrete. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3 The text of this standard refers to notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. A specific hazard statement is given in Section 9 . ( Warning —Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to exposed skin and tissue upon prolonged exposure. 2 ) 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 The strength developed by a bonding system that joins two regions of concrete is its most important property.
分类信息
关联关系
研制信息
归口单位: C09.25
相似标准/计划/法规
现行
ASTM D2724-19
Standard Test Method for Bond Strength of Bonded, Fused, and Laminated Apparel Fabrics
粘合、熔接和层压服装织物粘合强度的标准试验方法
2019-01-01
现行
KS K 0741
지오컴퍼지트의 접착 강도 시험방법
测定土工复合材料粘结强度的标准试验方法
2021-03-23
现行
ASTM D950-03(2020)e1
Standard Test Method for Impact Strength of Adhesive Bonds
胶粘剂冲击强度的标准试验方法
2020-01-01
现行
ASTM E518/E518M-22
Standard Test Methods for Flexural Bond Strength of Masonry
砌体抗弯粘结强度的标准试验方法
2022-12-01
现行
ASTM C1072-22
Standard Test Methods for Measurement of Masonry Flexural Bond Strength
砌体抗弯粘结强度测量的标准试验方法
2022-12-01
现行
ASTM C198-09(2019)
Standard Test Method for Cold Bonding Strength of Refractory Mortar
耐火砂浆冷粘强度标准试验方法
2019-04-01
现行
ASTM D903-98(2017)
Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
粘合剂剥离或剥离强度的标准试验方法
2017-11-01
现行
ASTM D4884/D4884M-22
Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
土工织物缝合或粘结接缝强度的标准试验方法
2022-07-01
现行
DIN 13990-2
Dentistry - Test methods for shear bond strength of adhesives for orthodontic attachments - Part 2: Bonding of the entire bonding system attachment-adhesive-enamel
牙科学.正畸附着体用粘合剂的剪切粘结强度的试验方法.第2部分:整个粘结系统的粘结附着体粘着珐琅质
2009-05-01
现行
ASTM D5041-98(2019)
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
粘合接头中胶粘剂断裂强度的标准试验方法
2019-06-01
现行
ASTM D4796-17(2022)
Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
热塑性路面标记材料粘结强度的标准试验方法
2022-12-01
现行
ASTM C1823/C1823M-20
Standard Test Method for Shear Bond Strength of Adhered Dimension Stone
粘结尺寸石料剪切粘结强度的标准试验方法
2020-08-01
现行
ASTM D7005/D7005M-16(2024)
Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
测定土工复合材料粘结强度(层间附着力)的标准试验方法
2024-02-01
现行
ASTM D1062-08(2023)
Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
金属对金属粘合的劈裂强度的标准试验方法
2023-05-01
现行
ASTM D1184-98(2020)
Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
粘合层压组件弯曲强度的标准试验方法
2020-01-01
现行
ASTM D3433-99(2020)
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
粘结金属接头中胶粘剂断裂强度的标准试验方法
2020-01-01
现行
ASTM C482-20
Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
瓷砖与波特兰水泥浆粘结强度的标准试验方法
2020-04-01
现行
ASTM D905-08(2021)
Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
通过压缩载荷剪切粘合剂粘结强度性能的标准试验方法
2021-04-01
现行
ASTM D7522/D7522M-21
Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete or Masonry Substrates
粘合在混凝土或砖石衬底上的FRP层压板系统的拉脱强度的标准试验方法
2021-01-01
现行
ASTM D2519-19a
Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
用螺旋线圈试验测定电绝缘清漆粘合强度的标准试验方法
2019-11-01