ISO 16911-2:2013描述了自动测量系统（AMS）流量监控的具体要求。它部分源自EN 14181，这是关于AMS质量保证的通用文件，与该文件一起适用。 ISO 16911-2:2013规定了AMS的选择、安装、调试和校准的条件和标准，用于确定管道气体流中源的体积流量。ISO 16911-2:2013通过与ISO 16911-1中描述的手动参考方法的相关性适用。 ISO 16911-2:2013主要用于监测垃圾焚烧炉和大型燃烧厂的排放。从技术角度来看，它可以应用于其他需要流量测量且不确定性最小的过程。

ISO 16911-2:2013 describes specific requirements for automated measuring system (AMS) flow monitoring. It is partly derived from EN 14181 which is the general document on the quality assurance of AMSs and is applicable in conjunction with that document. ISO 16911-2:2013 specifies conditions and criteria for the choice, mounting, commissioning and calibration of AMSs used for determining the volume flow rate from a source in ducted gaseous streams. ISO 16911-2:2013 is applicable by correlation with the manual reference methods described in ISO 16911-1. ISO 16911-2:2013 is primarily developed for monitoring emissions from waste incinerators and large combustion plants. From a technical point of view, it can be applied to other processes for which flow rate measurement is required with a defined and minimized uncertainty.