1.1本性能规范涵盖了用于制造床罩的机织物、针织物或植绒织物的性能要求。 1.2这些要求适用于与织物方向相关的特性的长度和宽度方向。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 4.1用于该最终用途的织物应符合 表1 . 4.2应认识到，织物可以用几乎无限多的结构变量（例如，纤维类型、纤维百分比、纱线捻度、纱线数量、经纱和纬纱数量、化学和机械整理）生产。 此外，时尚或美学意味着最终消费者可能会发现由不符合所有要求的面料制成的可接受物品 表1 . 4.2.1因此，任何单一的性能规范都不可能适用于可用于该最终用途的所有各种织物。 4.3特定性能和测试方法的用途和意义在规定测试方法的适当章节中进行了讨论。

1.1 This performance specification covers the performance requirements for woven, knitted, or flocked fabrics to be used in the manufacturing of bedspreads. 1.2 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== 4.1 Fabrics intended for this end-use should meet all of the requirements listed in Table 1 . 4.2 It should be recognized that fabrics can be produced with an almost infinite number of construction variables (for example, type of fibers, percentage of fibers, yarn twist, yarn number, warp and pick count, chemical and mechanical finishes). Additionally, fashion or aesthetics dictate that the ultimate consumer may find acceptable articles made from fabrics that do not conform to all of the requirements in Table 1 . 4.2.1 Hence, no single performance specification can possibly apply to all the various fabrics that could be utilized for this end-use. 4.3 The uses and significance of particular properties and test emthods are discussed in the appropriate sections of the specified test methods.