BS EN ISO 11297-3:2018-承压地下排水和污水管网改造用塑料管道系统-国家数字标准馆

现行 BS EN ISO 11297-3:2018

到馆提醒

收藏跟踪

购买正版

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure-Lining with close-fit pipes 承压地下排水和污水管网改造用塑料管道系统

发布日期： 2018-10-17

BS EN ISO 11297-3:2018与ISO 11297-1一起，规定了用于修复承压地下排水和污水管网的紧密配合衬砌系统的要求和试验方法。交叉引用:ISO 3EN 12201-1EN 12666-1ISO 3126EN 12201-5EN 12201-3EN 12201-4ISO 4427-3ISO 12176-2ISO 9967ISO 8772ISO 12176-1ISO 4427-5:2007ISO 11297-1:2018ISO 4427-2:2007EN 12201-2:2011ISO 4427-1:2007/Cor 1:2008ISO 1133-1:2011ISO 11295ISO 497ISO 3购买本文件时可提供的所有现行修订版。

BS EN ISO 11297-3:2018, in conjunction with ISO 11297-1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of underground drainage and sewerage networks under pressure.Cross References:ISO 3EN 12201-1EN 12666-1ISO 3126EN 12201-5EN 12201-3EN 12201-4ISO 4427-3ISO 12176-2ISO 9967ISO 8772ISO 12176-1ISO 4427-5:2007ISO 11297-1:2018ISO 4427-2:2007EN 12201-2:2011ISO 4427-1:2007/Cor 1:2008ISO 1133-1:2011ISO 11295ISO 497ISO 3All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS EN ISO 11297-1-2018

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure-General
承压地下排水和污水管网改造用塑料管道系统

BS EN ISO 11296-2-2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks-Lining with continuous pipes
地下无压排水和污水管网改造用塑料管道系统

BS EN ISO 11297-2-2018

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure-Lining with continuous pipes
承压地下排水和污水管网改造用塑料管道系统

BS EN ISO 11296-4-2018+A1-2021

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks-Lining with cured-in-place pipes
地下无压排水和污水管网改造用塑料管道系统

BS EN ISO 11296-7-2019

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks-Lining with spirally-wound pipes
地下无压排水和污水管网改造用塑料管道系统

BS EN ISO 11297-4-2018

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure-Lining with cured-in-place pipes
承压地下排水和污水管网改造用塑料管道系统

BS EN ISO 11296-3-2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks-Lining with close-fit pipes
地下无压排水和污水管网改造用塑料管道系统

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
地下无压排水和污水管网改造用塑料管道系统.第1部分:总则；德文版EN 13566-1:2002

ISO 11297-1-2018

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General
压力下地下排水和排水管网改造用塑料管道系统第1部分:总则

ISO 11296-1-2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General
塑料管道系统用于改造地下非压力排水和污水处理网络 - 第1部分:总则

UNE-EN 13566-1-2003

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
地下无压排水和污水管网改造用塑料管道系统.第1部分:总则

ISO 11297-2-2018

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes
塑料管道系统用于在压力下改造地下排水和污水处理网络 - 第2部分:连续管道衬里

ISO 11296-2-2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes
塑料管道系统用于改造地下非压力排水和污水处理网络 - 第2部分:连续管道衬里

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
地下无压排水和污水管网改造用塑料管道系统.第4部分:就地固化管道衬里；德文版EN 13566-4:2002

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes
地下无压排水和污水管网改造用塑料管道系统.第3部分:紧密配合管道衬里；德文版EN 13566-3:2002

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
地下无压排水和污水管网改造用塑料管道系统.第7部分:螺旋缠绕管道衬里；德文版EN 13566-7:2007

UNE-EN 13566-7-2007

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
地下无压排水和污水管网改造用塑料管道系统.第7部分:螺旋缠绕管道衬里

UNE-EN 13566-4-2003

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
地下无压排水和污水管网改造用塑料管道系统.第4部分:就地固化管道衬里

GB/T 41666.4-2024

地下无压排水管网非开挖修复用塑料管道系统第 4 部分：原位固化内衬法
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks—Part 4: Lining with cured-in-place pipes

ISO 11297-3-2018

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
塑料管道系统用于在压力下改造地下排水和污水处理网络 - 第3部分:紧密配合的管道衬里

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统