IEC 61892-6:20 19规定了在海上石油工业中用于钻井、生产、住宿、加工、储存和卸载目的的移动式和固定式海上装置中安装电气设备的具体要求，包括管道、泵站或“清管”站、压缩机站和单浮标系泊装置。 它适用于所有装置，无论是永久的、临时的、可移动的还是手持的，适用于交流装置和直流装置，没有任何电压等级限制。参考的设备标准可能会给出电压电平限制。 本文件规定了以下要求: -设备储存期间和安装期间的保护， -安装发电机和电动机， -安装变压器， -开关设备和控制设备组件的安装， -安装半导体转换器和UPS， -二次电池和电池组的安装， -灯具的安装， -安装加热和烹饪器具， -安装跟踪和表面加热， -电缆和布线的安装，包括低压和高压电缆， -与接地和连接有关的要求， -防雷；, -测试已完成的安装，以及 -文件。 本文件不适用于 -用于医疗目的的固定设备， -油轮的电气装置，以及 -控制电气设备产生的点火源以外的点火源。 这第四版取消并取代了2013年出版的第三版。本版构成技术修订版。 与上一版相比，此版本包括以下重大技术变更:a)增加了设备存放期间保护的要求； b)已删除对起居舱配电板外壳的特殊要求； c)UPS的安装要求已更新； d)修改了有关电池安装的要求； e)更新了三相交流用大型单芯电缆的要求； f)增加了与电缆运输系统相关的要求； g)包括IEC 61892-4:20 07中规定的接地连续性导体和设备接地连接尺寸表； h)有关控制装置和仪表安装的要求已被修改；删除了与设计和设备相关的条款。

IEC 61892-6:2019 provides specific requirements for the installation of electrical equipment in mobile and fixed offshore units, including pipeline, pumping or "pigging" stations, compressor stations and single buoy moorings, used in the offshore petroleum industry for drilling, production, accommodation, processing, storage and offloading purposes.
It applies to all installations, whether permanent, temporary, transportable or hand-held, to AC installations and DC installations without any voltage level limitation. Referenced equipment standards may give voltage level limitations.
This document specifies requirements such as those concerning
– protection during equipment storage and in the installation period,
– installation of generators and motors,
– installation of transformers,
– installation of switchgear and controlgear assemblies,
– installation of semiconductor converters and UPS,
– installation of secondary cells and batteries,
– installation of luminaires,
– installation of heating and cooking appliances,
– installation of trace and surface heating,
– installation of cables and wiring, both low-voltage and high-voltage cables,
– requirements in relation to earthing and bonding,
– lightning protection;,
– testing of completed installation, and
– documentation.
This document does not apply to
– fixed equipment for medical purposes,
– electrical installations of tankers, and
– control of ignition sources other than those created by electrical equipment.
This fourth edition cancels and replaces the third edition published in 2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) requirements for protection during equipment storage have been added;
b) the special requirements for distribution board enclosures in accommodation spaces have been deleted;
c) requirements for installation of UPS have been updated;
d) requirements regarding the installation of batteries have been modified;
e) requirements for large single-core cables for three-phase AC have been updated;
f) requirements in relation to cable transit systems have been added;
g) the table on the sizes of earth continuity conductors and equipment earthing connections, set out in IEC 61892-4:2007, has been included;
h) requirements as to the installation of controls and instrumentation have been modified; clauses relevant to design and equipment have been deleted.