IEC 60317-31:2015（E）规定了玻璃纤维缠绕、树脂或清漆浸渍、裸或漆包矩形铜绕组线的要求，温度指数180。本标准涵盖的标称导体尺寸范围为: -宽度:最小2.0 mm最大16.0 mm； -厚度:最小0.80 mm最大5.60 mm。规定的宽度和厚度组合以及规定的宽度/厚度比符合IEC 60317-0-4。这第二版取消并取代了1990年出版的第一版，修正案1:19 97和修正案2:20 05。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更: -新的3.2.2载有关于绕组线的一般注释，以前是范围的一部分； -在3中的1级漆包线上引入玻璃纤维覆盖层。2.2; -修订IEC 60317-0-4的参考文献，以明确其应用是规范性的。 关键词:温度指标180绕组线 本出版物应与IEC 60317-0-4:20 15一起阅读。

IEC 60317-31:2015(E) specifies the requirements of glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper winding wire, temperature index 180. The range of nominal conductor dimensions covered by this standard is:
- width: min.2,0 mm max.16,0 mm;
- thickness: min.0,80 mm max. 5,60 mm. The specified combinations of width and thickness as well as the specified width/thickness ratio are according to IEC 60317-0-4. This second edition cancels and replaces the first edition published in 1990, Amendment 1:1997 and Amendment 2:2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- new 3.2.2 containing general notes on winding wire, formerly part of the scope;
- introduction of glass fibre coverings over grade 1 enamelled conductor in 3.2.2;
- revision to references to IEC 60317-0-4 to make clear that their application is normative. Keywords: temperature index 180, winding wire

This publication is to be read in conjunction with IEC 60317-0-4:2015.