BS 2TA 42:2009-钛铝锻件规范.钼-锡-硅-碳合金（抗拉强度1205-1375MPa）（超过25mm至75mm的极限截面）-国家数字标准馆

现行 BS 2TA 42:2009

到馆阅读

收藏跟踪

购买正版

Specification for forgings of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm) 钛铝锻件规范.钼-锡-硅-碳合金（抗拉强度1205-1375MPa）（超过25mm至75mm的极限截面）

发布日期： 2009-11-30

交叉引用:BS TA 41BS TA 100BS TA 38BS TA 39BS TA 40EN 4500-1EN 4500-4购买本文件时可获得的所有现行修订均包含在购买本文件中。

Cross References:BS TA 41BS TA 100BS TA 38BS TA 39BS TA 40EN 4500-1EN 4500-4All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section 100 mm)
钛锻坯规范.铝钼锡硅合金（抗拉强度1050-1220MPa）（极限截面100mm）

Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)
钛铝钼锡硅碳合金（抗拉强度1250-1420 MPa）锻坯规范（极限截面25 mm）

BS 09/30193185 DC

BS 2TA 48. Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy. Tensile strength 1050-1200 MPa. Limiting ruling section 100 mm
BS 2TA 48 钛铝钼锡硅合金锻件规范抗拉强度1050-1200兆帕极限截面100毫米

BS 09/30193183 DC

BS 2TA 47. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy. Tensile strength 1050-1220 MPa. Limiting ruling section 100 mm
BS 2TA 47 钛铝钼锡硅合金锻坯规范抗拉强度1050-1220兆帕极限截面100毫米

Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 MPa) (limiting ruling section over 100 mm up to and including 150 mm)
钛铝钼锡硅合金（抗拉强度1000-1200MPa）锻坯规范

Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
钛锻坯规范.铝钼锡硅碳合金（抗拉强度1205-1375MPa）（超过25mm至75mm的极限截面）

BS 09/30193535 DC

BS 2TA 50. Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy. Tensile strength 1000-1200 MPa. Limiting ruling section over 100 mm up to and including 150 mm
BS 2TA 50 钛铝钼锡硅合金锻坯规范抗拉强度1000-1200兆帕超过100 mm（小于等于150 mm）的限制截面

Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 MPa) (limiting ruling section 25 mm)
钛铝钼锡硅合金机械加工用棒材和型材规范（抗拉强度1100-1280MPa）（极限划线截面25mm）

Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon- carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)
钛铝钼锡硅碳合金机械加工用棒材规范（抗拉强度1250-1420MPa）（极限截面25mm）

BS 09/30193543 DC

BS 2TA 57. Specification for plate of titanium- aluminium-molybdenum-tin-silicon alloy. Tensile strength 1030-1220 MPa. Maximum thickness 65 mm
BS 2TA 57 钛铝钼锡硅合金板材规范抗拉强度1030-1220兆帕最大厚度65毫米

BS 09/30193537 DC

BS 2TA 51. Forgings of titanium-aluminium-molybdenum- tin-silicon alloy. Tensile strength 1000-1200 MPa. Limiting ruling section over 100 mm up to and including 150 mm
BS 2TA 51 钛铝钼锡硅合金锻件抗拉强度1000-1200兆帕超过100 mm（小于等于150 mm）的限制截面

Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (thickness over 50 mm up to and including 65 mm)
钛铝钼锡硅合金板材规范（抗拉强度1030-1220 MPa）（厚度大于50 mm 小于等于65 mm）

BS 09/30193169 DC

BS 2TA 38. Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy. Tensile strength 1250-1420 MPa. Limiting ruling section 25 mm
BS 2TA 38 钛铝钼锡硅碳合金加工用棒材规范抗拉强度1250-1420兆帕限制截面25毫米

Specification for forgings of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm²) (limiting ruling section 65 mm)
钛铝锆钼硅合金锻件规范（抗拉强度990-1140 N/mm^2）（极限截面65 mm）

Specification for forging stock of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm²) (limiting ruling section 65 mm)
钛铝锆钼硅合金锻坯规范（抗拉强度990-1140 N/mm^2）（极限截面65 mm）

Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section over 25 mm up to and including 100 mm)
钛铝钼锡硅合金（抗拉强度1050-1220 MPa）机加工用棒材和型材规范（限制划线截面大于25 mm 小于等于100 mm）

Specification for bar for machining of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)
钛-铝-钼-锡-硅-碳合金（抗拉强度1205-1375MPa）机加工用棒材规范（限制划线截面大于25mm 小于等于75mm）

Specification for bar and section for machining of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (Tensile strength 1000-1200 MPa) (Limiting ruling section over 100 mm up to and including 150 mm)
钛铝-钼锡硅碳合金（抗拉强度1000-1200 MPa）机加工用棒材和型材规范（超过100 mm至150 mm（含150 mm）的极限划线截面）

Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
镍钴铬钼钛铝耐热合金坯料、棒材、锻件和零件（镍基、钴20、铬20、钼5.9、钛2.1、铝0.5）规范

Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4)
镍铬钴铝钼钛耐热合金坯料、棒材、锻件和零件（镍基、Cr15、Co14.2、Al5、Mo4、Ti4）规范

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统