BS EN 62911:2016规定了在试验过程中使用的常规电气安全试验程序 或在制造完整的设备、子组件或组件后，符合 IEC 60065、IEC 60950-1或IEC 62368-1，由交流电源或直流电源供电 供应，以检测制造故障和制造过程中不可接受的公差 材料。注:本标准中定义的所有试验不一定必须在最终产品制造地点进行。常规电气安全测试的最佳位置可由 设备制造商，并根据合格评定方案进行审查。 交叉引用:IEC 60065EN 60065IEC 60950-1EN 60950-1IEC 62368-1EN 62368-1购买时可用的所有现行修订版均包含在本文件的购买中。

BS EN 62911:2016 defines routine electrical safety test procedures for use during or after manufacturing of complete equipment, sub-assemblies or components, complying with IEC 60065, IEC 60950-1 or IEC 62368-1 and powered by an a.c. mains supply or d.c. mains supply, to detect manufacturing failures and unacceptable tolerances in manufacturing and materials.NOTE All the tests defined in this standard do not necessarily have to be performed at the end product manufacturing location. The optimal location for the routine electrical safety tests can be defined by the equipment manufacturer and reviewed under the conformity assessment scheme.Cross References:IEC 60065EN 60065IEC 60950-1EN 60950-1IEC 62368-1EN 62368-1All current amendments available at time of purchase are included with the purchase of this document.