SAE J518/3_202108-液压法兰卡箍双螺纹法兰连接用于仅需要低压的SAE J518-1（代码61）连接-国家数字标准馆

现行 SAE J518/3_202108

到馆提醒

收藏跟踪

购买正版

Hydraulic Flange Clamps, Two-Screw Flange Connection to be Used with SAE J518-1 (Code 61) Connections Where Only Low Pressure is Required 液压法兰卡箍双螺纹法兰连接用于仅需要低压的SAE J518-1（代码61）连接

发布日期： 2021-08-12

本SAE标准概述了SAE J518-1连接件低压应用中使用的法兰卡箍的一般和尺寸规范。有关端口尺寸、端口设计注意事项和法兰头尺寸，请参考SAE J518-1。组件的额定工作压力不得超过所有部件工作压力额定值中的最小值。以下通用规范补充了表中包含的所有未指定细节的尺寸数据。按照本标准制造的零件也与ISO 6162-1端口连接和法兰头兼容。

This SAE Standard outlines general and dimensional specifications for flange clamps for use in low pressure applications with SAE J518-1 connections. For port dimensions, port design considerations, and flange head dimensions, please refer to SAE J518-1.The rated working pressure of an assembly shall not exceed the least of all the component working pressure rated values.The following general specifications supplement the dimensional data contained in the tables with respect to all unspecified detail. Parts manufactured to this standard are also compatible with ISO 6162-1 port connections and flange heads.

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

BS ISO 6162-2-2018

Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws-Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
液压传动带有分体式或整体式法兰夹和公制或英制螺钉的法兰连接

KS B ISO 6162-2(2019 Confirm)

유압 유체 동력－스플릿 또는 일체형 플랜지 클램프와 미터계 또는 인치계 나사를 가진 플랜지 연결기－제2부：35 MPa∼40 MPa, DN 13∼DN 51의 압력에서 사용하는 플랜지 연결기
液压传动带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器第2部分:压力35MPa至40MPa DN13至DN51的法兰连接器

ISO 6162-2-2018

Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
液压传动.带分体式或整体式法兰夹和米制或英寸螺钉的法兰连接件.第2部分:压力为42mpa（420bar） DN 13至DN 76的法兰连接件端口和安装面

KS B ISO 6162-1(2019 Confirm)

유압 유체 동력－스플릿 또는 일체형 플랜지 클램프와 미터계 또는 인치계 나사를 가진 플랜지 연결기－제1부：3.5 MPa∼35 MPa, DN13∼DN127의 압력에서 사용하는 플랜지 연결기
液压传动带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器第1部分:压力为3.5MPa至35MPa DN13至DN127的法兰连接器

BS ISO 6162-1-2012

Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws-Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
液压传动带有分体式或整体式法兰夹和公制或英制螺钉的法兰连接

ISO 6162-1-2012

Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
液压流体动力——带分体式或一体式法兰夹和公制或英制螺钉的法兰连接件第1部分:压力为3.5 MPa（35 bar）至35 MPa（350 bar）、DN 13至DN 127的法兰接头、端口和安装面

BS ISO 6164-2018

Hydraulic fluid power. Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80
液压传动压力为42 MPa、DN 25至80的四螺钉一体式方形法兰连接件

Hydraulic fluid power — Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80
液压传动.在压力为42mpa DN 25至80时使用的四个螺钉整体式方形法兰连接

Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002)
液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第2部分:在35MPa（350）至40MPa（400巴）、DN 13至DN 51压力下使用的法兰连接器（ISO 6162-2-2002）

DIN ISO 6162-2-DRAFT

Draft Document - Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002)
文件草稿.液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第2部分:在35MPa（350巴）至40MPa（400巴）压力下使用的法兰连接器 DN 13至DN 51（ISO 6162-2-2002）

DIN ISO 6162-1-DRAFT

Draft Document - Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3.5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002)
文件草稿.液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第1部分:在3.5 MPa（35巴）至35 MPa（350巴）、DN 13至DN 127压力下使用的法兰连接器（ISO 6162-1-2002）

Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3.5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002 + Cor. 1:2004)
液压传动.带分体式或整体式法兰夹和公制或英制螺钉的法兰连接器.第1部分:在3.5MPa（35bar）至35MPa（350bar）压力下使用的法兰连接器 DN 13至DN 127（ISO 6162-1-2002+Cor.1-2004）

MIL MIL-F-52525/29 Notice 1-Cancellation

FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), CLAMP-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREE BENT TUBE, SHORT DROP, TYPE B, ELBOW, FOR USE WITH TYPE 100R2, DOUBLE BRAID HOSE (S/S BY MIL-F-52525/12A)
配件、钢丝增强液压软管和对半卡箍:可现场连接（可重复使用）、卡箍至4螺栓对开法兰、90度弯管、短落差、B型弯头用于100R2型双编织软管（S/S由MIL-F-52525/12A提供）

MIL MIL-F-52525/23A

FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES FIELD ATTACHABLE (REUSEABLE), CLAMP-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT, TYPE C, ADAPTER, FOR USE WITH TYPE 100R10 4-SPIRAL WRAP HOSE (SUPERSEDING MIL-F-52525/23) (S/S BY MIL-DTL-52525/23B)
与100R10型4-螺旋缠绕软管（取代MIL-F-52525/23）一起使用的C型接头、钢丝增强液压软管和半卡箍可现场连接（可重复使用）卡箍至4-螺栓对开法兰直型适配器（MIL-DTL-52525/23B）

MIL MIL-F-52525/15A

FITTINGS, WIRE REINFORCED HYDRAULIC HOSE & CLAMP HALVES, FIELD ATTACHABLE (REUSEABLE), SCREW ON TO 4 BOLT SPLIT FLANGE, 90 DEG. BENT TUBE, TYPE C, FOR USE WITH TYPE 100R10 4 SPIRAL WRAP HOSE (SUPERSEDING MIL-F-52525/15) (S/S BY MIL-DTL-52525/15B)
与100R10-4型螺旋缠绕软管（取代MIL-F-52525/15）一起使用的C型90度弯管钢丝增强液压软管和对半卡箍配件可现场连接（可重复使用）拧到4螺栓对开法兰上（MIL-DTL-52525/15B）

MIL MIL-F-52525/24A

FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES FIELD ATTACHABLE (RESUEABLE), CLAMP-ON TO 4-BOLT SPLIT-FLANGE, 45 DEG. BENT TUBE, TYPE C, ELBOW, FOR USE WITH TYPE 100R10 4-SPIRAL WRAP HOSE (SUPERSEDING MIL-F-52525/24) (S/S BY MIL-DTL-52525/24B)
与100R10型4螺旋缠绕软管（代替MIL-F-52525/24）一起使用的C型45度弯管四螺栓对开法兰卡箍配件、钢丝增强液压软管和对半卡箍（可恢复）

MIL MIL-F-52525/25A

FITTINGS,WIRE REINFORCED HYDRAULIC HOSE&CLAMP-HALVES FIELD ATTACHABLE (REUSEABLE),CLAMP-ON TO 4-BOLT SPLIT-FLANGE,90 DEG. BENT TUBE,SHORT DROP,TYPE C,ELBOW,FOR USE WITH TYPE100R10 4-SPIRAL WRAP HOSE (SUPERSEDING MIL-F-52525/25) (S/S BY MIL-DTL-52525/25B)
与100R10型4螺旋缠绕软管（取代MIL-F-52525/25）一起使用的可现场连接（可重复使用）、卡箍至4螺栓对开法兰、90度弯管、短落差C型弯头的配件、钢丝增强液压软管和对半卡箍（由MIL-DTL-52525/25B替代）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统