SAE AMS4143F-铝合金锻件和轧制或锻造环6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-T6）固溶和沉淀热处理-国家数字标准馆

现行 SAE AMS4143F

到馆提醒

收藏跟踪

购买正版

Aluminum Alloy Forgings and Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6) Solution and Precipitation Heat Treated 铝合金锻件和轧制或锻造环6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-T6）固溶和沉淀热处理

发布日期： 2019-12-16

本规范涵盖厚度小于等于4英寸（102 mm）的模具和手工锻件形式的铝合金，径向厚度小于等于2.50英寸（63.5 mm）的轧制或锻造环，以及任何尺寸的锻件或环的库存（见8.5）。

This specification covers an aluminum alloy in the form of die and hand forgings 4 inches (102 mm) and under in thickness, rolled or forged rings 2.50 inches (63.5 mm) and under in radial thickness, and stock of any size for forging or rings (see8.5).

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
铝和铝合金锻件手工锻件和轧制环锻件的标准规范

GB/T 32249-2015

铝及铝合金模锻件、自由锻件和轧制环形锻件通用技术条件
Aluminum and aluminum-alloy die forgings, hand forgings and rolled ring forgings—General specification

Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
铝和铝合金锻件手工锻件和轧制环锻件（公制）的标准规范

Aluminum Alloy, Hand Forgings and Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
铝合金、手工锻件和轧制环6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-T852/T851）固溶热处理、机械应力消除和沉淀热处理

Aluminum Alloy, Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219-T352) Solution Heat Treated and Mechanically Stress Relieved (Stabilized: Nov 2022)
铝合金轧制或锻造环6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-T351、2219-T352）固溶热处理和机械应力消除（2022年11月稳定）

Aluminum Alloy, Forgings and Rolled or Forged Rings, (6061-T6), Solution and Precipitation Heat Treated
固溶和沉淀热处理的铝合金、锻件、轧制或锻造环（6061-T6）

Aluminum Alloy Forgings and Rolled or Forged Rings and Forging Stock 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4) Solution Heat Treated and Naturally Aged
经固溶热处理和自然时效处理的铝合金锻件、轧制或锻造环和锻坯1.0Mg-0.60Si-0.28Cu-0.20Cr（6061-T4）

Quality Assurance, Sampling and Testing Aluminum Alloys and Magnesium Alloy Wrought Products (Except Forging Stock), and Rolled, Forged, or Flash Welded Rings
铝合金和镁合金锻造产品（锻坯除外）以及轧制、锻造或闪光焊接环的质量保证、取样和测试

Quality Assurance, Sampling and Testing, Aluminum Alloys and Magnesium Alloys, Wrought Products, Except Forging Stock, and Rolled, Forged, or Flash Welded Rings
质量保证、取样和测试、铝合金和镁合金、锻造产品（锻坯除外）以及轧制、锻造或闪光焊接环

Aluminum Alloy Die Forgings, and Rolled or Forged Rings 0.9Si - 0.62Mg - 0.25Cr (6151-T6) Solution and Precipitation Heat Treated (Stabilized: Nov 2014)
铝合金模锻件和轧制或锻造环0.9Si-0.62Mg-0.25Cr（6151-T6）固溶和沉淀热处理（稳定:2014年11月）

Aluminum Alloy Forgings and Rolled Rings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated
铝合金锻件和轧制环4.4Cu-0.85Si-0.80Mn-0.50Mg（2014-T6）固溶和沉淀热处理

Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61) Solution and Precipitation Heat Treated
经固溶和沉淀热处理的铝合金、模锻和手工锻件、轧制环和锻坯2.3Cu-1.6Mg-1.1Fe-1.0Ni-0.18Si-0.07Ti（2618-T61）

Aluminum Alloy, Die and Hand Forgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated
经固溶和沉淀热处理的5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T6）铝合金、模具和手工锻件及轧制环

Aluminum Alloy, Hand Forgings and Rolled Rings 1.0mg 0.60si 0.28cu 0.20cr Solution Heat Treated, Stress Relieved By Compression, and Precipitation Heat Treated
铝合金、手工锻件和轧制环1.0mg 0.60si 0.28cu 0.20cr固溶热处理、压缩消除应力和沉淀热处理

Aluminum Alloy Hand Forgings and Rolled Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T652) Solution Heat Treated, Stress Relief Compressed, and Precipitation Heat Treated
1.0Mg-0.60Si-0.28Cu-0.20Cr（6061-T652）固溶热处理、应力消除压缩和沉淀热处理的铝合金手工锻件和轧制环

Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
铝合金、轧制或锻造环5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T651、7075-T652）固溶热处理、机械应力消除和沉淀热处理

Aluminum Alloy Rings, Rolled or Forged 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T651, 2014-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
经固溶热处理、机械应力消除和沉淀热处理的轧制或锻造4.5Cu-0.85Si-0.80Mn-0.50Mg（2014-T6512014-T652）铝合金环

Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
铝合金、轧制或锻造环5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T7351、7075-T7352）固溶热处理、机械应力消除和沉淀热处理

Aluminum Alloy, Rolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T651, 6061-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
铝合金、轧制或锻造环1.0Mg-0.60Si-0.28Cu-0.20Cr（6061-T651、6061-T652）固溶热处理、机械应力消除和沉淀热处理

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统